This is the same fix as bc846b7da6
applied to the other part of the code-base that builds ceph.conf (I'd
missed that 349b9ab3e7 had duplicated
this code).
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
The Ceph Manager daemon (ceph-mgr) runs alongside monitor daemons, to
provide additional monitoring and interfaces to external monitoring and
management systems.
Only works as of the Kraken release.
Co-Authored-By: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
Until now, only the first task were executed.
The idea here is to use `listen` statement to be able to notify multiple
handler and regroup all of them in `./handlers/main.yml` as notifying an
included handler task is not possible.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Problem: too many different commands to do the same thing. The 'cut'
command on infrastructure-playbooks/purge-cluster.yml was also wrong.
This sed command from osixia in ceph-docker
https://github.com/ceph/ceph-docker/pull/580/ addresses all the
scenarios.
Signed-off-by: Sébastien Han <seb@redhat.com>
ntp is still installed even if ntp_service_enabled is set to false.
That could be a problem if the time synchronization is managed by
something else than ceph-ansible or if you want to use different NTP
implementation as suggested in #1354.
Fixes: #1354
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Guits <gabrioux@redhat.com>
If a group of hosts is empty, (for instance 'mdss', in case of a
deployment without any mds node), the playbook will fails when trying
to restart service with `"'dict object' has no attribute u'XXX'"` error.
The idea here is to force the `with_items` statements in all included handler tasks
to get at least an empty array.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
systctl tuning should be in the sysctl.d directory. This creates
a seperation from what values were set specific to ceph, and what
values were set by the operator.
Signed-off-by: Tyler Brekke <tbrekke@redhat.com>
This fixes issue #1299. According to @ktdreyer s comment in the ticket,
he fixed the web server config so also older (non-SNI) python clients
can use the uri module here.
This removes the implicit order requirement when using OSD fragments.
When you use OSD fragments and ceph-osd role is not the last one,
the fragments get removed from ceph.conf by ceph-common.
It is not nice to have this code at two locations, but this is
necessary to prevent problems, when ceph-osd is the last role as
ceph-common gets executed before ceph-osd.
This could be prevented when ceph-common would be explicitly called
at the end of the playbook.
Signed-off-by: Christian Zunker <christian.zunker@codecentric.de>
Prior to this change, ceph-ansible would install the main NFS Ganesha
server daemon on Ubuntu, but it would skip the Ceph FSALs.
Running "apt-get install nfs-ganesha" will only install the main NFS Ganesha
server. It does *not* pull in the RGW FSAL
(/usr/lib/x86_64-linux-gnu/ganesha/libfsalrgw.so)
Running "apt-get install nfs-ganesha-fsal" will install the RGW FSAL as
well as the main NFS Ganesha server package.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
From Josh Durgin, "I'd recommend not setting vfs_cache_pressure in
ceph-ansible. The syncfs issue is still there, and has caused real
problems in the past, whereas there hasn't been good data showing lower
vfs_cache_pressure is very helpful - the only cases I'm aware of have
shown it makes little difference to performance."
https://bugzilla.redhat.com/show_bug.cgi?id=1395451
As of Infernalis, the Ceph daemons run as an unprivileged "ceph" UID,
and this is by design.
Commit f19b765 altered the default
civetweb port from 80 to 8080 with a comment in the commit log about
"until this gets solved"
Remove the comment about permissions on Infernalis, because this is
always going to be the case on the Ceph versions we support, and it
is just confusing.
If users want to expose civetweb to s3 clients using privileged TCP
ports, they can redirect traffic with iptables, or use a reverse proxy
application like HAproxy.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This avoids a situation where during a rolling_update we try to talk to
a mon to get the fsid and if that mon is down the playbook hangs
indefinitely.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This gives us more flexibility than installing the ceph-release package
as we can easily use different mirrors. Also, I noticed an issue when
upgrading from jewel -> kraken as the ceph-release package for those
releases both have the same version number and yum doesn't know to
update anything.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
To configure kernel the task is using "command" module which is not
respect operator ">". So this task just print to "stdout": "never >
/sys/kernel/mm/transparent_hugepage/enabled"
fix: #1319
Signed-off-by: Sébastien Han <seb@redhat.com>
Some playbooks use [0-9]*, others use \d+$
The latter is more correct since cluster name may contain numbers.
Signed-off-by: Shengjing Zhu <zsj950618@gmail.com>
If cephx is disabled it is not necessary to include `facts_mon_fsid.yml`
in `roles/ceph-common/tasks/facts.yml`.
Fix: #1300
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We changed the way we declare image.
Prior to this patch we must have a "user/image:tag"
format, which is incompatible with non docker-hub registry where you
usually don't have a "user". On the docker hub a "user" is also
identified as a namespace, so for Ceph the user was "ceph".
Variables have been simplified with only:
* ceph_docker_image
* ceph_docker_image_tag
1. For docker hub images: ceph_docker_name: "ceph/daemon" will give
you the 'daemon' image of the 'ceph' user.
2. For non docker hub images: ceph_docker_name: "daemon" will simply
give you the "daemon" image.
Infrastructure playbooks have been modified as well.
The file group_vars/all.docker.yml.sample has been removed as well.
It is hard to maintain since we have to generate it manually. If
you want to configure specific variables for a specific daemon simply
edit group_vars/$DAEMON.yml
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1420207
Signed-off-by: Sébastien Han <seb@redhat.com>
This commits allows us to restart Ceph daemon machine by machine instead
of restarting all the daemons in a single shot.
Rework the structure of the handler for clarity as well.
Signed-off-by: Sébastien Han <seb@redhat.com>
According to #1216, we need to simply the code by removing the
support of anything before Jewel.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Some users purge their environments and leave it in a non-optimal state.
e.g: packages are still installed but /etc/ceph and /var/lib/ceph don't
exist anymore. This will result in multiple failures across the play,
sometimes hard to detect. Populating these directories "just in case"
should help us solving these problems.
Closes: #1253
Signed-off-by: Sébastien Han <seb@redhat.com>
This allows the user to set ip_version to either ipv4 or ipv6. This
resolves a bug where monitor_address is set to an ipv6 address, but the
template fails to render because it's hardcoded to look for an 'ipv4'
key in the ansible facts.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1416010
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
Resolves: bz#1416010
Allow for more operator flexibility in the `rgw frontends` setting
while maintaining backwards compatibility with the old vars. This
allows an operator to, for example, use the civetweb settings for
implementing SSL ports.
For available civetweb configuration parameters, see:
https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md
The libcephfs1 package was removed from ceph-common in
cb1c06901e, however it was not synced
to group_vars/all.yml.sample using the `generate_group_vars_sample.sh`
script. This fixes up the comment formatting in the ceph-common
defaults and brings the group_vars sample back into sync.
Prior to this change, a playbook run with '--tags' or '--skip-tags'
would fail, because the ceph-common role would not include the
release.yml task, and this file defines critical things like
ceph_release.
Thanks Andrew Schoen <aschoen@redhat.com> for help with the fix.
There is no need to become root on local_action. This will event trigger
an error on some systems as it will try to run a sudo command. If the
current user does not have passwordless sudo, Ansible will fail. Anyway
using the current user is perfectly fine and no elevation privilege is
needed.
Signed-off-by: Sébastien Han <seb@redhat.com>
The Keystone v2 APIs are deprecated and scheduled to be removed in
Q release of Openstack. This adds support for configuring RGW to
use the current Keystone v3 API.
The PKI keys are used to decrypt the Keystone revocation list when
PKI tokens are used. When UUID or Fernet token providers are used in
Keystone, PKI certs may not exist, so we now accommodate this scenario
by allowing the operator to disable the PKI tasks.
Jewel added support for user/pass authentication with Keystone,
allowing deployers to disable Keystone admin token as required
for production deployments.
This implements configuration for the new RGW Keystone user/pass
authentication feature added in Jewel.
See docs here: http://docs.ceph.com/docs/master/radosgw/keystone/
Just for clarity and because we can we now show the name of the
ceph configuration file that is generated.
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the initial mon keyring
doesn't exist so we are generating a new one.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We do not need to run another condition for 'ceph_rhcs' since the
include we came from already has it, so we are already inside this
condition.
We also spell red hat entirely instead of rh and we remove capital
letters.
Signed-off-by: Sébastien Han <seb@redhat.com>
When `ceph_stable_rh_storage` is True, every cluster node should have a
`/etc/apt/preferences.d/rhcs.pref` file with the following contents:
```
Explanation: Prefer Red Hat packages
Package: *
Pin: release o=/Red Hat/
Pin-Priority: 999
```
ceph-deploy already did this when used with ice-setup, and we need to do
the same thing with the ceph-ansible stack.
Closes: #1182 and https://bugzilla.redhat.com/show_bug.cgi?id=1404515
Signed-off-by: Sébastien Han <seb@redhat.com>
Only when ceph_origin == "upstream", install_on_redhat.yml will include
redhat_ceph_repository.yml, same as debian.
In redhat_ceph_repository.yml, ceph_custom_repo will be added.
But in check_mandatory_vars.yml, ceph_origin=="upstream" can't be combined
with ceph_custom
in hammer, ceph-common depended on libcephfs (indirectly, via
python-cephfs). this is no longer the case in jewel or later, so it can
be removed from debian_ceph_packages
Signed-off-by: Casey Bodley <cbodley@redhat.com>
For readibility and clarity we do not run any tasks directly in the
main.yml file. This file should only contain include, which helps us
later to apply conditionnals if we want to.
Signed-off-by: Sébastien Han <seb@redhat.com>
mon_group_name variable can be used to override mons group, but
this task assumes the group is always 'mons'. So we need to use
the var to find the group name instead.
Before this patch only the address for the first mon would show
in the ceph.conf even if there were multiple mons in the inventory.
Signed-off-by: Andrew Schoen <aschoen@redhat.com>
This commit solves the situation where you lost your fetch directory and
you are running ansible against an existing cluster. Since no fetch
directory is present the file containing the fsid doesn't exist so we
are creating a new one. Later the ceph.conf gets updated with a wrong
fsid which causes problems for clients and ceph processes.
Closes: #1148
Signed-off-by: Sébastien Han <seb@redhat.com>
We removed the "apache" setting for "radosgw_frontend" in
adfdf6871e.
As part of that change, we removed the final references to
ceph-extra.repo, but I failed to clean up this file itself.
Now that nothing uses this file, delete it.
This file contained the sole reference to redhat_distro_ceph_extra, so
we can drop that variable as well.
Refactor the code using 'package' module
Fix Issue #520
(However it doesn't cover all cases because some cases are not refactorable.
Ex: because of diverging packages name between distribution)
a397922 introduced a syntax error by attempting to default an unquoted
string, which causes execution failures on some ansible versions with:
Failed to template {{ ceph_rhcs_mount_path }}: Failed to template {{ ceph_stable_rh_storage_mount_path | default(/tmp/rh-storage-mount) }}: template error while templating string: unexpected '/'
libfcgi is dead upstream (http://tracker.ceph.com/issues/16784)
The RGW developers intend to remove libfcgi support entirely before the
Luminous release.
Since libfcgi gets little-to-no developer attention or testing, remove
it entirely from ceph-ansible.
Andrew Schoen
Andrew Schoen
Matthew Vernon
Sébastien Han
Konstantin Shalygin
Guillaume Abrioux
Concubidated
Daniel Marks
Christian Zunker
Ken Dreyer
Shengjing Zhu
Logan V
Casey Bodley
Alfredo Deza
Jirayut Nimsaeng
James Saint-Rossy