15 KiB
Upgrading Kubernetes in Kubespray
Kubespray handles upgrades the same way it handles initial deployment. That is to say that each component is laid down in a fixed order.
You can also individually control versions of components by explicitly defining their versions. Here are all version vars for each component:
- docker_version
- docker_containerd_version (relevant when
container_manager==docker) - containerd_version (relevant when
container_manager==containerd) - kube_version
- etcd_version
- calico_version
- calico_cni_version
- weave_version
- flannel_version
- kubedns_version
See Multiple Upgrades for how to upgrade from older Kubespray release to the latest release
Unsafe upgrade example
If you wanted to upgrade just kube_version from v1.18.10 to v1.19.7, you could deploy the following way:
ansible-playbook cluster.yml -i inventory/sample/hosts.ini -e kube_version=v1.18.10 -e upgrade_cluster_setup=true
And then repeat with v1.19.7 as kube_version:
ansible-playbook cluster.yml -i inventory/sample/hosts.ini -e kube_version=v1.19.7 -e upgrade_cluster_setup=true
The var -e upgrade_cluster_setup=true is needed to be set in order to migrate the deploys of e.g kube-apiserver inside the cluster immediately which is usually only done in the graceful upgrade. (Refer to #4139 and #4736)
Graceful upgrade
Kubespray also supports cordon, drain and uncordoning of nodes when performing a cluster upgrade. There is a separate playbook used for this purpose. It is important to note that upgrade-cluster.yml can only be used for upgrading an existing cluster. That means there must be at least 1 kube_control_plane already deployed.
ansible-playbook upgrade-cluster.yml -b -i inventory/sample/hosts.ini -e kube_version=v1.19.7
After a successful upgrade, the Server Version should be updated:
$ kubectl version
Client Version: version.Info{Major:"1", Minor:"19", GitVersion:"v1.19.7", GitCommit:"1dd5338295409edcfff11505e7bb246f0d325d15", GitTreeState:"clean", BuildDate:"2021-01-13T13:23:52Z", GoVersion:"go1.15.5", Compiler:"gc", Platform:"linux/amd64"}
Server Version: version.Info{Major:"1", Minor:"19", GitVersion:"v1.19.7", GitCommit:"1dd5338295409edcfff11505e7bb246f0d325d15", GitTreeState:"clean", BuildDate:"2021-01-13T13:15:20Z", GoVersion:"go1.15.5", Compiler:"gc", Platform:"linux/amd64"}
Pausing the upgrade
If you want to manually control the upgrade procedure, you can set some variables to pause the upgrade playbook. Pausing before upgrading each upgrade may be useful for inspecting pods running on that node, or performing manual actions on the node:
upgrade_node_confirm: true- This will pause the playbook execution prior to upgrading each node. The play will resume when manually approved by typing "yes" at the terminal.upgrade_node_pause_seconds: 60- This will pause the playbook execution for 60 seconds prior to upgrading each node. The play will resume automatically after 60 seconds.
Pausing after upgrading each node may be useful for rebooting the node to apply kernel updates, or testing the still-cordoned node:
upgrade_node_post_upgrade_confirm: true- This will pause the playbook execution after upgrading each node, but before the node is uncordoned. The play will resume when manually approved by typing "yes" at the terminal.upgrade_node_post_upgrade_pause_seconds: 60- This will pause the playbook execution for 60 seconds after upgrading each node, but before the node is uncordoned. The play will resume automatically after 60 seconds.
Node-based upgrade
If you don't want to upgrade all nodes in one run, you can use --limit patterns.
Before using --limit run playbook facts.yml without the limit to refresh facts cache for all nodes:
ansible-playbook facts.yml -b -i inventory/sample/hosts.ini
After this upgrade control plane and etcd groups #5147:
ansible-playbook upgrade-cluster.yml -b -i inventory/sample/hosts.ini -e kube_version=v1.20.7 --limit "kube_control_plane:etcd"
Now you can upgrade other nodes in any order and quantity:
ansible-playbook upgrade-cluster.yml -b -i inventory/sample/hosts.ini -e kube_version=v1.20.7 --limit "node4:node6:node7:node12"
ansible-playbook upgrade-cluster.yml -b -i inventory/sample/hosts.ini -e kube_version=v1.20.7 --limit "node5*"
Multiple upgrades
⚠️ Do not skip releases when upgrading--upgrade by one tag at a time. ⚠️
For instance, if you're on v2.6.0, then check out v2.7.0, run the upgrade, check out the next tag, and run the next upgrade, etc.
Assuming you don't explicitly define a kubernetes version in your k8s_cluster.yml, you simply check out the next tag and run the upgrade-cluster.yml playbook
-
If you do define kubernetes version in your inventory (e.g. group_vars/k8s_cluster.yml) then either make sure to update it before running upgrade-cluster, or specify the new version you're upgrading to:
ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml -e kube_version=v1.11.3Otherwise, the upgrade will leave your cluster at the same k8s version defined in your inventory vars.
The below example shows taking a cluster that was set up for v2.6.0 up to v2.10.0
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 1h v1.10.4
boomer Ready master,node 42m v1.10.4
caprica Ready master,node 42m v1.10.4
$ git describe --tags
v2.6.0
$ git tag
...
v2.6.0
v2.7.0
v2.8.0
v2.8.1
v2.8.2
...
$ git checkout v2.7.0
Previous HEAD position was 8b3ce6e4 bump upgrade tests to v2.5.0 commit (#3087)
HEAD is now at 05dabb7e Fix Bionic networking restart error #3430 (#3431)
# NOTE: May need to sudo pip3 install -r requirements.txt when upgrading.
ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 1h v1.11.3
boomer Ready master,node 1h v1.11.3
caprica Ready master,node 1h v1.11.3
$ git checkout v2.8.0
Previous HEAD position was 05dabb7e Fix Bionic networking restart error #3430 (#3431)
HEAD is now at 9051aa52 Fix ubuntu-contiv test failed (#3808)
:info: NOTE: Review changes between the sample inventory and your inventory when upgrading versions. :info:
Some deprecations between versions that mean you can't just upgrade straight from 2.7.0 to 2.8.0 if you started with the sample inventory.
In this case, I set "kubeadm_enabled" to false, knowing that it is deprecated and removed by 2.9.0, to delay converting the cluster to kubeadm as long as I could.
$ ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
"msg": "DEPRECATION: non-kubeadm deployment is deprecated from v2.9. Will be removed in next release."
...
Are you sure you want to deploy cluster using the deprecated non-kubeadm mode. (output is hidden):
yes
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 114m v1.12.3
boomer Ready master,node 114m v1.12.3
caprica Ready master,node 114m v1.12.3
$ git checkout v2.8.1
Previous HEAD position was 9051aa52 Fix ubuntu-contiv test failed (#3808)
HEAD is now at 2ac1c756 More Feature/2.8 backports for 2.8.1 (#3911)
$ ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
"msg": "DEPRECATION: non-kubeadm deployment is deprecated from v2.9. Will be removed in next release."
...
Are you sure you want to deploy cluster using the deprecated non-kubeadm mode. (output is hidden):
yes
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 2h36m v1.12.4
boomer Ready master,node 2h36m v1.12.4
caprica Ready master,node 2h36m v1.12.4
$ git checkout v2.8.2
Previous HEAD position was 2ac1c756 More Feature/2.8 backports for 2.8.1 (#3911)
HEAD is now at 4167807f Upgrade to 1.12.5 (#4066)
$ ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
"msg": "DEPRECATION: non-kubeadm deployment is deprecated from v2.9. Will be removed in next release."
...
Are you sure you want to deploy cluster using the deprecated non-kubeadm mode. (output is hidden):
yes
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 3h3m v1.12.5
boomer Ready master,node 3h3m v1.12.5
caprica Ready master,node 3h3m v1.12.5
$ git checkout v2.8.3
Previous HEAD position was 4167807f Upgrade to 1.12.5 (#4066)
HEAD is now at ea41fc5e backport cve-2019-5736 to release-2.8 (#4234)
$ ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
"msg": "DEPRECATION: non-kubeadm deployment is deprecated from v2.9. Will be removed in next release."
...
Are you sure you want to deploy cluster using the deprecated non-kubeadm mode. (output is hidden):
yes
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 5h18m v1.12.5
boomer Ready master,node 5h18m v1.12.5
caprica Ready master,node 5h18m v1.12.5
$ git checkout v2.8.4
Previous HEAD position was ea41fc5e backport cve-2019-5736 to release-2.8 (#4234)
HEAD is now at 3901480b go to k8s 1.12.7 (#4400)
$ ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
"msg": "DEPRECATION: non-kubeadm deployment is deprecated from v2.9. Will be removed in next release."
...
Are you sure you want to deploy cluster using the deprecated non-kubeadm mode. (output is hidden):
yes
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 5h37m v1.12.7
boomer Ready master,node 5h37m v1.12.7
caprica Ready master,node 5h37m v1.12.7
$ git checkout v2.8.5
Previous HEAD position was 3901480b go to k8s 1.12.7 (#4400)
HEAD is now at 6f97687d Release 2.8 robust san handling (#4478)
$ ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
"msg": "DEPRECATION: non-kubeadm deployment is deprecated from v2.9. Will be removed in next release."
...
Are you sure you want to deploy cluster using the deprecated non-kubeadm mode. (output is hidden):
yes
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 5h45m v1.12.7
boomer Ready master,node 5h45m v1.12.7
caprica Ready master,node 5h45m v1.12.7
$ git checkout v2.9.0
Previous HEAD position was 6f97687d Release 2.8 robust san handling (#4478)
HEAD is now at a4e65c7c Upgrade to Ansible >2.7.0 (#4471)
⚠️ IMPORTANT: Some of the variable formats changed in the k8s_cluster.yml between 2.8.5 and 2.9.0 ⚠️
If you do not keep your inventory copy up to date, your upgrade will fail and your first master will be left non-functional until fixed and re-run.
It is at this point the cluster was upgraded from non-kubeadm to kubeadm as per the deprecation warning.
ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 6h54m v1.13.5
boomer Ready master,node 6h55m v1.13.5
caprica Ready master,node 6h54m v1.13.5
# Watch out: 2.10.0 is hiding between 2.1.2 and 2.2.0
$ git tag
...
v2.1.0
v2.1.1
v2.1.2
v2.10.0
v2.2.0
...
$ git checkout v2.10.0
Previous HEAD position was a4e65c7c Upgrade to Ansible >2.7.0 (#4471)
HEAD is now at dcd9c950 Add etcd role dependency on kube user to avoid etcd role failure when running scale.yml with a fresh node. (#3240) (#4479)
ansible-playbook -i inventory/mycluster/hosts.ini -b upgrade-cluster.yml
...
$ kubectl get node
NAME STATUS ROLES AGE VERSION
apollo Ready master,node 7h40m v1.14.1
boomer Ready master,node 7h40m v1.14.1
caprica Ready master,node 7h40m v1.14.1
Upgrade order
As mentioned above, components are upgraded in the order in which they were installed in the Ansible playbook. The order of component installation is as follows:
- Docker
- Containerd
- etcd
- kubelet and kube-proxy
- network_plugin (such as Calico or Weave)
- kube-apiserver, kube-scheduler, and kube-controller-manager
- Add-ons (such as KubeDNS)
Component-based upgrades
A deployer may want to upgrade specific components in order to minimize risk or save time. This strategy is not covered by CI as of this writing, so it is not guaranteed to work.
These commands are useful only for upgrading fully-deployed, healthy, existing hosts. This will definitely not work for undeployed or partially deployed hosts.
Upgrade docker:
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=docker
Upgrade etcd:
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=etcd
Upgrade etcd without rotating etcd certs:
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=etcd --limit=etcd --skip-tags=etcd-secrets
Upgrade kubelet:
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=node --skip-tags=k8s-gen-certs,k8s-gen-tokens
Upgrade Kubernetes master components:
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=master
Upgrade network plugins:
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=network
Upgrade all add-ons:
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=apps
Upgrade just helm (assuming helm_enabled is true):
ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=helm
Migrate from Docker to Containerd
Please note that migrating container engines is not officially supported by Kubespray. While this procedure can be used to migrate your cluster, it applies to one particular scenario and will likely evolve over time. At the moment, they are intended as an additional resource to provide insight into how these steps can be officially integrated into the Kubespray playbooks.
As of Kubespray 2.18.0, containerd is already the default container engine. If you have the chance, it is advisable and safer to reset and redeploy the entire cluster with a new container engine.