The saga of aligning onnx and torch padding conventions continues.
```python
onnx_pads = [low_x, low_y, low_z, high_x, high_y, high_z]
torch_pads = [low_z, high_z, low_y, high_y, low_x, high_x]
```
So not only is the lexicographical ordering hierarchy swapped (low/high
x spatial-dim -> spatial-dim x low/high) but the ordering in the the
spatial-dim specification is also reversed.
This patch properly reverses the pad ordering (and actually uses the
`shuffledPadding` to pad).
The pattern `m_OnnxListOfConstantInts` previously only checked if the
attr inside an `onnx.Constant` op is a `DenseResourceElementsAttr`, but
didn't handle `ElementsAttr`'s. This patch adds support for
`ElementsAttr` and provides an example of it's use via a lit test for
`onnx.Unsqueeze`.
`onnx.Shape` can select only a subset of indices using attributes. Add
support for these attributes.
---------
Co-authored-by: zjgarvey <47986913+zjgarvey@users.noreply.github.com>
Following up from the discussion in
<https://github.com/llvm/torch-mlir/pull/3550>, I've edited the lowering
to prevent OOB extracts in a more direct fashion (i.e., just clamping
directly).
I don't think this affects the lit tests at all, but I've tested the
changes in our external test suite at
<https://github.com/nod-ai/SHARK-TestSuite/tree/main/>. I found the
issue when I was unexpectedly getting `nan`'s along the output image
border for a resize test there.
Change linalg.matmul_unsigned to linalg.matmul with unsigned type_fn
Signed-off-by: Max Dawkins <max.dawkins@gmail.com>
Co-authored-by: Max Dawkins <max.dawkins@gmail.com>
The static uneven divisible AdaptiveAvgPool2d means that although the
input size is not an integer multiple of ouput size, but the kernel and
stride size can also be fixed (not dynamic). The derivation logic of
kernel and stride size is consistent with
torch/_decomp/decomposations.py:adaptive_avg_pool2d as described in the
following:
1. Stride Size
Firstly , derive the start index in each reduce operation according to
the output size (`n`), `start_index = ([0, 1, ..., n - 1] * input_size)
// output_size`. For each index `k`, if `k * (input_size % output_size)
< output_size`, then the current and previous stride keeps the same as
`input_size // output_size`. So suppose `(n-1) * (input_size %
output_size) < output_size`, the stride in the whole AdaptiveAvgPool2d
process keeps static, as `input_size // output_size`.
2. Kernel Size
torch/_decomp/decomposations.py:adaptive_avg_pool2d calculates a static
kernel size when the input/output sizes satisfy either of the two
conditions, `input_size % output_size == 0` or `output_size %
(input_size % output_size) == 0`. Here if `input_size % output_size ==
0`, then the kernel size equals `input_size // output_size`, otherwise
`input_size // output_size + 1.`
Torch has all scalars represented as i64 and f64 types which results in
extraneous trunc-extf commands. We can rework this by elliding
widen-narrow cases away.
This PR adds a conversion in the TorchOnnxToTorch pass for the ONNX
Multinomial operation. It also adds a TorchToLinalg lowering for the
`aten.Multinomial` op and does a light refactor of some repeated code
that generates random floating point numbers in
`TorchToLinalg/Random.cpp`.
This PR adds support to `fx_importer.py` for handling custom ops that
return an array of tensors. As long as the length of the array is
consistent across runs (determined statically), then this patch will
work. This does not require that the number of tensors returned is
determined by the op's definition.
CC @sjain-stanford
We do have support for translating unbacked symbolic_ints that arise
from data-dependent ops like `aten.nonzero`. This PR adds the python lit
test coverage for the same.
This patch adds a few misc pad op related changes:
1. Addresses issue <https://github.com/llvm/torch-mlir/issues/3457>
2. Addresses issue <https://github.com/llvm/torch-mlir/issues/3442>
3. Fixes the padding order for asymmetrically padded onnx.Conv ops
4. Enables passing quantization through those onnx.Conv op pre-paddings
5. Modifies the torch-to-linalg lowering of AtenReplicationPad2d op to
enable support for input rank != 4
Unfortunately, even with all of these changes, the e2e tests for the
ReplicationPad2d still fail the onnx config, since the torch export
procedure for rearranging the pad order is complicated enough that the
padding ints end up not being able to fold back to constants.
The LpNormalization lowering was previously just computing the norm,
which is incorrect. This computes the norm then divides the input tensor
by it's norm.
I've tested this against some simple onnx models locally. I'll look into
adding a test case for this in an external test suite.
Register `aten.fake_quantize_per_channel_affine` and
`aten.fake_quantize_per_tensor_affine.tensor_qparams` ops
---------
Co-authored-by: Ze Zhang <ze.zhang@getcruise.com>
Fix the pad tensor rearrangement such that we change the representation
from [x1_begin, x2_begin, ..., x1_end, x2_end,...] to [xn_begin, xn_end,
...., x2_begin, x2_end, x1_begin, x1_end] where x1, x2 .. xn are the
dimensions of the pads tensor argument.
---------
Co-authored-by: zjgarvey <zjgarvey@gmail.com>
Co-authored-by: zjgarvey <47986913+zjgarvey@users.noreply.github.com>
Addresses an issue with onnx.Gather lowering to linalg:
<https://github.com/nod-ai/SHARK-Turbine/issues/242>
The builder for tensor.expand_shape, without an explicitly provided
output shape, fails to infer an output shape in the case of multiple
dynamic reassociation dims. I tried adding the output shape explicitly
for tensor.expand_shape, but ran into compilation issues later on (see
<https://github.com/iree-org/iree/issues/17760>).
This PR adds support by lowering this op to tensor.reshape when multiple
dynamic reassociation dims are provided.
Due to the custom operation parser, the print and parser were expecting
two different forms.
One having the dictionary before the value and the other after.
Following the format of the other constants ops, the constant.int will
follow the `value attr-dict` format. Updated the parser accordingly.
- Adds limited support for lowering onnx.Loop to primLoopOp
- lower in the pipeline`torch-to-scf` there is a check to see if loop is
for like. A primLoopOp is for like when the input condition is a
`trueBoolConstant`. To adapt the onnx to torch lowering to take
advantage of it, the implementation checks for specific op patterns in
the loodBody region and decides if loop is for like and uses the right
input condition op.
- to adapt the onnxLoopBody to torchLoopBody, we need to adapt the input
block arguments and set the correct output condition variable in the
loop body.
- scanOutput variables are currently not supported.
Before this PR, a statically shaped aten.convolution would generate
dynamically shaped linalg IR, and even `-canonicalize` would not be able
to fold it back into static shapes. This PR ensure that shape
calculations are folded on construction to directly generate statically
shaped linalg IR.
We achieve that by ensuring that `arith` ops involved in computing
shapes are created via `createOrFold`, so that later uses of
`getAsOpFoldResult` see constants instead of those ops.
For example
```
module {
func.func @forward(%arg0: !torch.vtensor<[32,336,112,112],f32>,
%arg1: !torch.vtensor<[336,168,3,3],f32>,
%arg2: !torch.vtensor<[336],f32>)
-> !torch.vtensor<[32,336,56,56],f32> {
%false = torch.constant.bool false
%int2 = torch.constant.int 2
%int1 = torch.constant.int 1
%0 = torch.prim.ListConstruct %int1, %int1 : (!torch.int, !torch.int) -> !torch.list<int>
%1 = torch.prim.ListConstruct %int2, %int2 : (!torch.int, !torch.int) -> !torch.list<int>
%2 = torch.prim.ListConstruct : () -> !torch.list<int>
%3 = torch.aten.convolution %arg0, %arg1, %arg2, %1, %0, %0, %false, %2, %int2
: !torch.vtensor<[32,336,112,112],f32>, !torch.vtensor<[336,168,3,3],f32>, !torch.vtensor<[336],f32>, !torch.list<int>,
!torch.list<int>, !torch.list<int>, !torch.bool, !torch.list<int>, !torch.int
-> !torch.vtensor<[32,336,56,56],f32>
return %3 : !torch.vtensor<[32,336,56,56],f32>
}
}
```
would result in
```
[...]
%padded = tensor.pad %2 low[%14, %15, %16, %17] high[%14, %15, %16, %17] {
^bb0(%arg3: index, %arg4: index, %arg5: index, %arg6: index):
tensor.yield %cst : f32
} : tensor<32x336x112x112xf32> to tensor<?x?x?x?xf32>
[...]
%45 = linalg.conv_2d_ngchw_gfchw {dilations = dense<1> : vector<2xi64>, strides = dense<2> : vector<2xi64>}
ins(%expanded, %expanded_37 : tensor<?x2x?x?x?xf32>, tensor<2x168x168x3x3xf32>)
outs(%expanded_44 : tensor<32x2x168x?x?xf32>) -> tensor<32x2x168x?x?xf32>
[...]
```
and with this PR all shapes are static.
This adds a torchvision op to torch-mlir and a path from onnx.DeformConv
to torchvision.deform_conv2d.
I'm not implementing the torch->linalg lowering for the torchvision op
yet, but posting this PR to get feedback on some of the choices being
made here and to flesh out the onnx frontend a bit.
This adds an onnx->torch conversion for onnx.RoiAlign into
torchvision.roi_align or torchvision.roi_pool, and adds those two
torchvision ops to torch-mlir.
In one of our downstreams, we encountered an internal assertion failure
in an intermediate pass from `AtenTensorOp::fold` invocation:
```
external/llvm-project/llvm/include/llvm/Support/Casting.h:650: decltype(auto) llvm::dyn_cast(const From &) [To = mlir::torch::Torch::NonValueTensorType, From = mlir::Type]: Assertion `detail::isPresent(Val) && "dyn_cast on a non-existent value"' failed.
```
for this snippet in the IR:
```
%arg1: !torch.tensor {torch.type_bound = !torch.vtensor<[1,1,15360],f32>}
...
%218 = torch.aten.size %arg1 : !torch.tensor -> !torch.list<int>
%219 = torch.aten.tensor %218, %none, %none, %false : !torch.list<int>, !torch.none, !torch.none, !torch.bool -> !torch.tensor
```
Turns out this was
[fixed](https://github.com/llvm/torch-mlir/pull/3189/files#diff-dc8ed165c207918e606490eee3984b1ad51d7034e6aac36fc046bf47f6f03f4fR3719)
eventually (and we were on an old hash of torch-mlir). This PR submits
just the lit test for test coverage on that specific change:
```c++
OpFoldResult AtenTensorOp::fold(FoldAdaptor adaptor) {
auto resultTy = dyn_cast<ValueTensorType>(getType());
// lit test this
if (!resultTy || !resultTy.hasSizes() || !resultTy.hasDtype())
return nullptr;
...
```
1. truncates zero-points to i32
2. modifies the default accumulator type for i8 from i64 to i32.
3. now uses the input dtype to infer accumulator dtype.
zjgarvey
Rob Suderman
Marius Brehler
Rob Suderman
Gaurav Shukla
yyp0
Vinayak Dev
pdhirajkumarprasad
Vivek Khandelwal
Yuanqiang Liu
Ze Zhang
jinchen
Arham Khan
Matthew Francis-Landau
Sambhav Jain
Sagar Kulkarni
Aart Bik
Phaneesh Barwaria
Christopher McGirr
Matthias Gehre
Suraj Sudhir