After the recent change of cmake variables
from PYTHON_INCLUDE_DIRS to Python3_INCLUDE_DIRS
and PYTHON_LIBRARIES to Python3_LIBRARIES, there were
a few files that still had references to the old
variables. This patch fixes that.
It was annoying that we were creating shape.get_extent in the middle of
the bufferization pipeline, as it required running convert-shape-to-std
at an awkward place. To make that cleaner, just open-code the
extract_element ops that shape.get_extent expands into.
This is a little gross, but it helps with the macroscopic pipeline
ordering issues. Anyway, the train is long-gone of trying to treat
shapes as some special data type that should only be operated on with
shape ops.
Also,
- reorder tensor constant bufferize (which is a module pass) to bracket
all the bufferization function passes, to make the parallelism
opportunities there clearer. Now we have a very clean little
bufferization segment of our pipeline construction.
* IREE doesn't have proper install support, so there is some temporary hoaky hacking in our CMakeLists.txt to shuttle some symlinks around.
* Reworked the original numpy e2e with IREE test to pipe through iree-translate.
* Removed all of the C++-level dependencies.
* Will generalize and apply to the PyTorch backend in a followup.
This vastly simplifies our code, allowing deleting multiple ops,
simplifying multiple passes, and removing a whole pass.
Now `refback` dialect is down to one op (refback.alloc_memref, which
simplifies allocations to just take a shape instead of individual
extents).
* In most situations, this eliminates the need to explicitly set a path to the Torch cmake files.
* Also upgrades to new Python3 find package. (should eliminate 2.x mismatches)
* Since PyTorch is located by asking Python where it is, this eliminates a lot of causes of mismatch. (one source of truth)
* Fixes#107
* I wouldn't say I love what had to be done here. Worth a conversation with the PT devs (probably as part of a rollup of a bunch of this stuff).
* A bit gross because I took the chance to upgrade all of the backend bits to the new MLIR Python bindings and we still co-mingle the old and new for now.
* Since the Python created PassManagers are configured for explicit nesting, I had to upgrade some of the pass pipelines to be explicit.
* The demo in mul_maximum_e2e.py now compiles, runs through PyTorch and through the JIT, prints and asserts the same results.
* I am not claiming that this is the prettiest API in this patch: consider that this is just directly using low-level APIs and there should be an intervening high level API.
This involved adding a `tcp.splatted` op to splat a dynamically sized
init tensor. See rationale in TCPOps.td docs.
One interesting observation is that when lowering tcf.matmul to
linalg.matmul, we need to both 1) create the error checks and 2)
calculate a shape transfer function to create the init tensors.
Previously, 2) was deferred to bufferizing tcp.matmul later. I'm not
sure if this is a conflation of concerns or not. For now, it's not a big
burden.
* We're building libLLVM.so anyway. Saves a lot of time/space to link tools against it.
* MLIR tools do not yet respect this (but it doesn't seem to hurt).
* Incorporates a dep on the new MLIRPublicAPI shared library.
* More work is needed to further separate npcomp between public API and impl libraries, but amalgamating them will hold until then.
* Conversions are very simple, suporting mul, maximum and add (alpha=1 only).
* Example added with pass pipeline needed to run.
* Much missing off of the golden path but sufficient for such simple cases.
* convolution, convolution_backward, _log_softmax, _log_softmax_backward_data, nll_loss_forward, nll_loss_backward, nll_loss2d_forward, nll_loss2d_backward, copy_
* Extends the recognition logic and metadata for handling inplace transformations, optional tensors, ints, lists and dropped args.
* The kernel_calls generated by test_conv_nllloss_grads.py now convert to ATen.
* The result *almost* comes out as a pure tensor program with the exception of the copy_ op, which I will do some followup work to deal with.
* More progress on #97
Two changes:
- no more "verifyPasses" constructor arg for PassManager
- OpPassManager defaults to requiring explicit "nest" calls when created
via the C++ API. The behavior upstream for mlir-opt still obeys the
"implicit" mode, so I just slapped that onto all our pass managers.
I pinged https://reviews.llvm.org/D90671 to get a signal for whether we
are expected to migrate to explicit mode. If so, I'll do that too later.
* Enables -gsplit-dwarf for both LLVM and NPCOMP, reducing the occurrence of the ~GB scale binaries.
* CMake shared linking seems incompatible with this, so shared objects are still "too big" but there are few of them.
* Reduces disk thrash on clean/install of everything.
Now, the only bufferization we have left is lowering tensor constants to
memref, which will hopefully proceed soon after Rahul's new
std.global_memref lands + the lowering to LLVM IR. Then I'll port
LowerConstantTensorsToMemref to upstream and we'll be 100% upstream
bufferization, except for our local TCP dialect (which will probably go
away and be replaced by std elementwise + linalg named ops on tensors :)
).
The current code was inserting all build_list ops
after the last constant op since it was assuming that all
elements being passed in were constants.
This patch replaces that patch with a new function that
inserts the build_list ops before the terminator.
Also modifies test_export_conv2d_fwd.py since its output
no longer matches.
TEST: Added test_export_cat.py which is the code in #102
* This is sufficient to capture the forward and backward pass and gradients of a convolutional model with an nllloss.
* As with the forward conv, the backward conv is a special case wrapped in an enigma on the PyTorch side. There aren't many like it, so special casing is just what we do.
* When I traced this, I found that the copy_ op is not yet boxing compatible so I had to map it manually. If there are many more like this, I'll probably do something a bit more clever to reduce duplication.
* This exposes new signature patterns that will need to be handled by the ATen lowering. Will take care of that next: It will be nice to have an e2e of a non-trivial case with full gradients.
* Fixes#97.
* None's out Device? args.
* Emits bool tensors if needed.
* Adds some stderr tracing to better see what is going on.
* Test case that exercises NLLLoss.
* This test case emits something for backward calculations but there are some issues still to be worked out, so that part is left out of the test case.
* Progress on #97
* Deletes prior code generator from previous attempt (moved some of it into this one).
* Renames old generated tablegen source to "Legacy".
* Generates ODS and import rules for most binary and unary arithmetic ops.
* Removes old generated ops and integration tests that were testing details of the prior setup.
Register the following for the multiply op:
- tcf.mul
- tcp.mul
- TCP->TCP lowering
- Shape transfer, broadcasted multiplicands
- Lower to standard `MulFOp` op
* Two op interfaces, one for querying instance metadata and one for getting static data needed to construct an op from a generic form.
* For torch.generic_kernel ops, metadata is splatted in during capture from Torch (it comes from the op registry, which will work for either device capture or graph import).
* Moved the 'add' out of the generated set so I can experiment on it. It implements the TorchBuildableKernelOpInterface interface which provides its metadata.
* The ATenRecognizeKernelsPass pass generically lowers from a torch.generic_kernel to recognized ops that implement the TorchBuildableKernelOpInterface, handling the various types of transformations that we allow at this stage.
Fix linker error:
lib/Python/libNPCOMPPythonCommon.a(MlirInit.cpp.o): in function `mlir::npcomp::python::npcompMlirInitialize()':
mlir-npcomp/build/../lib/Python/MlirInit.cpp:46: undefined reference to `npcompInitializeLLVMCodegen'
* Enables the conv2d fwd test and ResA (which are both small).
* Deletes resnet18 and vgg, which both run but generate output that crashes FileCheck and lit (or at least makes them take an eternity).
* Adds Basicpy List, Tuple, Dict types and plumbs through C API.
* Started debugging the issues around aten::conv2d capture, but a PyTorch bug is suspected.
* Was able to manually verify that the basic conv2d forward test captures correctly with a workaround.
* Need to resolve some printing issues upstream and move these tests to an integration test target (they take ~seconds to run).
Sean Silva
harsh-nod
Stella Laurenzo
Aaron J Arthurs
Marius Brehler
Mehdi Amini