This commit adds the support for index.Tensor op when the index values
are negative. This commit wraps around the index values by checking
their values at run time.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
check the return type of the division to figure out whether to use
the floating point implementation of a division or to use the integer.
the issue rose from the fact that the inputs are all integer but the
result was casted to floating point. The conversion then chose to
use the integer implementation of division which is not legal in tosa
when all the inputs get casted to floating point.
fix(TorchToLinalg): AtenDivScalarOp
upcast self operand as well if applicable, the self operand must also
be casted to float as it can be an integer.
* add support for mhlo
* Add Test for torch.ne
* fix torch.ne shape/add static test case
* add support for static torch.ne
---------
Co-authored-by: root <root@n31-177-039.byted.org>
The `copy_` op being replaced by `RecomposeSliceCopy_` operates on a
subset of the tensor being mutated, while the `index_put` op being
used to replace the `copy_` op operates on the entire tensor being
mutated. This means that the result type of the `index_put` should be
the type of the input to `index_put` and we need to make sure that
`copy_` does not have users before replacing to avoid type conflicts.
This commit also fixes the result type used for the
`AtenArangeStartStepOp`, and an off-by-1 error when creating the
indices vector.
Lastly, this commit also clamps the `end` value from the slice to the
size of the dimension.
When `use_tracing=True` is used to import a model into Torch-MLIR,
several casts get inserted in the IR to bridge the untyped inputs and
outputs with the typed body of the computation. These casts create
extra aliases of tensors that cause the current analysis in
`maximize-value-semantics` to fail.
In particular, the `maximize-value-semantics` analysis assumes that the
only valid alias right after an overwrite is the overwritten
alias. So, if there is a use of a casted version of the overwritten
alias after the overwrite, the analysis fails.
This commit improves the analysis by identifying all cast-like aliases
of the overwritten alias and allowing such aliases to be used after an
overwrite.
Because this issue only arises when using tracing, it cannot be
currently tested e2e, so only lit test is added.
* Add AtenIndexTensor StableHlo support
* clean up
* Empty commit, trigger test
* try to debug hanging test
* fix segfulat
* fix bad include
---------
Co-authored-by: zhekun.zhang <zhekun.zhang@bytedance.com>
Lowering torch operations that allow different compatible data types
in its operands to tosa end up generating invalid tosa IR with mixed
data types. In tosa spec, certain operations (generally element-wise
operations) require all operands to have the same data type.
Add wrapper functions for those element-wise tosa ops to perform op
creation with type conversion if necessary.
This commit adds dtype functions for all the torch ops that did not
previously have one and removes the pass `RefineTypes`, since the
abstract interpretation library now takes care of all the dtype
propagation.
All dtype functions added are tested except for
- `aten.embedding`
- `aten._embedding_bag`
- `aten.embedding_bag`
These functions need a change to the testing framework to allow
specifying the actual data inside the tensor used for testing. I will
fix this in a follow up patch.
Co-authored-by: Jiahao Li <liplus17@163.com>
Add support for lowering torch.aten.cat to tosa.concat
* add support for aten cat to tosa
---------
Co-authored-by: yifei <y.zhou@xilinx.com>
Co-authored-by: Lisa Liu <lingl@xilinx.com>
When the user does not specify the `stride` value in 2d pooling ops,
`stride` is given the value of an empty list. However, the current
lowerings for pooling ops assumed that the `stride` operand would
always be a list of two ints, leading to crashes when that was not the
case. This commit fixes the crashes by setting the value of `stride`
to `kernel_size` when `stride` is the empty list, since this is the
default `stride` value specified in PyTorch docs. See:
https://pytorch.org/docs/stable/generated/torch.nn.MaxPool2d.html#torch.nn.MaxPool2d
The current decomposition for `aten.randn.generator` does not specify
the `dtype` argument of the empty tensors created to store the random
values. This leads to invalid IR when the output type of the `randn`
op is not the default PyTorch dtype.
-- In Python we have the concept of negative dimension indexing.
-- We would want to normalize such dimensions to be +ve and within the
expected range instead.
-- This commit takes care of a few remaining set of Ops and their
lowerings by applying `toPositiveDim` and `isValidDim` to the
extracted integer `dim` value.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
-- This commit adds e2e support for atend.sort op.
-- 1. Adds aten.sort op in torch dialect.
-- 2. Adds tm_tensor.sort op in TMTensor dialect.
-- 3. Adds lowering of aten.sort -> tm_tensor.sort.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
`TorchToTMTensor` depends on `TorchMLIRTorchUtils` for
`mlir::torch::torch_upstream::get_reduction_enum`.
`TorchMLIRTorchConversionPasses` depends on multiple libs for both tblgen'd
headers and definitions. Test with `ninja TorchMLIRTorchConversionPasses` from
a clean build.
-- This commit adds e2e support for aten.randint by decomposing it into
an aten.randint.low by setting low=0.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
This commits adds the support for cases for index_put_op:
1.) where index is a 2-d tensor.
2.) where indices is a list of tensors and none, with exactly
2 non none tensors along the consecutive dimensions.
This commit also adds a utility to compute the broadcast shape
given the two input tensors.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
This commit also adds the support for non-unit output padding in the
case of transposed convolution.
Signed-Off By: Vivek Khandelwal<vivek@nod-labs.com>
The ops `aten.convolution_overrideable` and
`aten.convolution_backward_overrideable` are currently not e2e tested
in Torch-MLIR. Moreover, there is no way to add e2e tests for them
because the ops cannot be called using the CPU backend (this also
prevents adding tested dtype functions for these ops). Since these two
ops are not expected to ever appear in PyTorch traces obtained through
standard means (https://github.com/pytorch/pytorch/issues/97481),
Torch-MLIR should not have to worry about them.
The `RecomposeComplexOps` pass currently does not have a TableGen
declaration and it is using the base class of `DecomposeComplexOps`,
which causes `--mlir-print-ir-after-all` to create wrong pass
labels. This commit fixes that as well as some minor typos in the name
of the pass.
To keep things simple in shape functions, `Scalar` inputs are
considered `float`s. This means that when inserting the shape
functions into the IR, we must cast any `!torch.number`s into `float`s
so that the operand type matches the expected type in the shape
function. This commit adds the cast from `Scalar` to `float`.
There are several ops that have their shape function upstream and had
not been updated in Torch-MLIR to use the upstream version. This
commit updates those shape function. In addition, TODOs have been
added for shape functions that should be upstream but are not.
The original design for the dtype functions outlined in
https://github.com/llvm/torch-mlir/issues/1462 was unable to properly
handle ops that take optional tensors as an input when the optional
tensor has a value of None. By the time the op gets imported into
torch-mlir, if an optional value is None, all information about the
original type is lost from the op type signature, preventing
torch-mlir from knowing if a value of None was from an optional tensor
or not, which was crucial in the original design since each tensor
argument must be turned into two separate arguments for the dtype
function.
This commit changes the interface to dtype functions such that each
tensor turns into a tuple of two ints, the first representing the rank
of the tensor and the second the dtype of the tensor. Since now there
is a one-to-one correspondence between the operands of an op and the
operands of its dtype function, there is no ambiguity about which
operand of the op corresponds with which operand of the dtype
function.
To test the implementation, this commit defines dtype function for
convolution op, which takes one optional tensor as an argument.
* implemented ceil_mode== true support for lowering aten.max_pool2d to tosa
* add e2e test for lowering aten.max_pool2d to tosa with ceil_mode=true
---------
Co-authored-by: Lisa Liu <lingl@xilinx.com>
* LowerToBackendContract: Explicitly error out on unimplemented operator
But only reject torch.operator when results are invalid.
Otherwise it might be a custom op that the backend supports.
This commit adds a check that `defaultDtype` exists in the RefineTypes
handling of `AtenSumOp` before accessing the method `isInteger`, which
crashes the program is `defaultDtype` is null.
The handling of `defaultDtype` is the same as the one used for the
`AtenSumDimIntListOp`.
* implemented lowering torch.aten.constant_pad_nd to tosa
* add constant_pad_nd e2e tests to TOSA_PASS_SET
* add PadModule_basic & PadWithNoneValModule_basic to TOSA_PASS_SET
---------
Co-authored-by: Lisa Liu <lingl@xilinx.com>
Currently, the op `torch.tensor_static_info_cast` will not get
canonicalized away if the result type has any shape or dtype
information. This is because `isValidSubtype` only returns true when
the tensor types being compared are exactly the same or the supertype
has no shape and dtype information. Being unable to canonicalize away
the `torch.tensor_static_info_cast` gets in the way of further
optimizations, such as shape propagation.
This commit improves `isValidSubtype` by adding logic that compares
the shapes and dtypes of the two tensor types to determine of one type
is indeed a valid subtype of the other.
Fixes https://github.com/llvm/torch-mlir/issues/1926
The current implementation of `getScalarValue` does not check that the
input to a `ValueTensorLiteralOp` is an i64 before extracting the
value, and it does not check that the result type of the
`PrimNumToTensorScalarOp` is also an i64. This leads to crashes or
invalid IR generated when the `input` is something other than an i64
tensor or `!torch.int`.
This commit addresses those issues. In addition, the function
`getScalarValue` is renamed to `getScalarIntValue` to make it clear
that it *only* extracts scalar integers.
The data-flow analysis does not always propagate information to the
entire graph. This results in some lattice elements being
uninitialized. Currently the lattice elements are not checked to see
if they are uninitialized before rewriting the graph, potentially
resulting in invalid IR (see
https://github.com/llvm/torch-mlir/issues/1896).
This commit adds handling for uninitialized lattice elements.
Set PyTorch and TorchVision version to nightly release 2023-02-27.
This commit also adds the lowering for aten.add and aten.Float.Scalar op.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
This patch replaces all MHLO operations with their StableHLO
counterparts and adds a validation pass to ensure that no MHLO operations
remain before translating all Stablehlo operations to the MHLO dialect
for further lowering to the Linalg dialect.
This patch also updates all lit tests so that they refer to the
`convert-torch-to-stablehlo` pass and so that they check for StableHLO
operations.
Rename BlockAndValueMapping to IRMapping
Moved PrimTupleConstructOp type validation to its own verifier as the
tablegen version does not work for a combination of variadic input and
non-variadic output.
`llvm::makeArrayRef` is now deprecated and can be
replaced by the newly introduced `ArrayRef` deduction guides.
Fixes: #1808
Co-authored-by: Victor Guerra <vm.guerramoran@criteo.com>
One of the potential values for a `torch_upstream::ScalarType` is
`Undefined`. This means that conversion of a `ScalarType` to another
type is a computation that can fail. To enforce handling of the
failure case, this commit makes the two helper functions that convert
`ScalarType`s into other types return `failure()` when the
`ScalarType` is `Undefined`.
Credit to @vivekkhandelwal1 for finding the necessary changes.
Summary of changes:
- Switch Tosa_IntArrayAttr[N], Tosa_IntArrayAttrUpto[N] to DenseI64ArrayAttr.
- Replace kNoIterationLimit with kNoLimit. (https://reviews.llvm.org/D140525)
- Add dependency on MhloPasses when MHLO is enabled
- Specify result type when using mhlo::DotOp
There are several decompositions that assume the operands of the op
have dtypes available; however, the only time dtypes are guaranteed to
be present is when the graph has reached the backend contract. In
general, every pass that happens before reaching the backend contract
should not assume dtypes are available and should use `hasDtype` to
check first.
This commit adds `hasDtype` checks to every decomposition that uses
dtypes.
This commit replaces the `tanh` dtype function, which was being used
to test the implementation of dtype functions in
a710237437, with a dtype function for
`expm1`. The dtype function for `expm1` is identical to the `tanh`
one, so the same level of testing is maintained.
Currently, there are ops getting dtype information from the
`RefineTypes` pass and ops getting dtype information from the
`TorchDtypeRefinementPipeline`. Since each pass can only propagete
dtype information for the ops it knows how to handle, some models with
many ops handled in both passes require the two dtype propagation
passes to execute many times, reaching the iteration limit set in the
`LowerToBackendContractPass`. To temporarily avoid this issue while
the migration to `TorchDtypeRefinementPipeline` is finished, this
commit switches `tanh` to `expm1`, since the latter is used a lot less
in large models.
This reverts commit eaab9be207, since it
is causing the post-merge CI tests to fail, causing subsequent PRs to be
blocked. Specifically, the tests
`ElementwiseAtenLogicalAndOpPromoteBroadcastModule_basic` and
`ElementwiseAtenLogicalXorOpPromoteBroadcastModule_basic` fail because
the oracle does not match the computed result. This patch reverts the
commit to make the post-merge builds green again.
-- The dtype of the result of `aten.embedding` should match that of
the `weight` operand's (operand[0]) instead of hardcoding to f32.
-- This commit aims to provide a fix for the same.
Signed-off-by: Abhishek Varma <abhishek@nod-labs.com>
Summary of changes:
- LLVM now includes <optional> instead of "llvm/ADT/Optional.h" in most
(although not all) places
(https://reviews.llvm.org/rG541ef3d61e9341cd38420c0dbca9250c4d0ea04c).
This patch replaces the affected instances of `llvm::Optional` with
`std::optional`.
- In the usages of llvm::Optional that remain, llvm::Optional::value()
is deprecated, so this patch replaces them with a dereference.
Functions like `getTypeForScalarType` that do a mapping from one set
of types to another should not fail, and if they do it
should be obvious to the developer that that function has an
unhandled case.
Instead of silently failing when encountering an unsupported type,
this commit adds a `report_fatal_error` at the end, similar to other
type translation functions in this file.
In order to verify if a given IR satisfies the backend contract, the
verifier needs to know if decompositions took place, and if so, which
ops were decomposed and which were not.
This commit adds two arguments to `verifyBackendContractPass` to
specify if decompositions took place and which ops to consider backend
legal, similar to the arguments of `LowerToBackendContractPass`.
Summary of changes:
- Replace `llvm::None` with `std::nullopt`, since the former is deprecated
(https://reviews.llvm.org/D139763)
- Use setter for symbol visibility instead of passing string attribute when
creating FuncOp
* [custom op] Generalize shape library logic to work with dtypes
This commit generalizes the shape library logic, so that dtype rules
for ops can also be expressed using the same mechanism. In other
words, each op can now have a shape function and a dtype function
specified in Python that is imported during lowering to calculate the
shapes and dtypes throught a program. For more information about how
to specify a dtype function, see the updated
`docs/adding_a_shape_and_dtype_function.md`.
For those not familiar with how the shape library works, the file
`docs/calculations_lib.md` provides an overview.
Currently `getTensorRank` returns -1 if it was unable to get the rank
of the tensor. However, not every use in the codebase was checking the
return value, and in some cases, the return value was casted to
unsigned leading to some infinte loops when an unranked tensor reached
a decomposition.
This commit changes the return of `getTensorRank` to
`Optional<unsigned>` to make it clear to the user that the function
can fail.
This commit also changes a couple of for loops that iterate a vector
in reverse order that can potentially become infinite loops into
range-based for loops.
A circular dependency was introduced in e7edcc62fd.
Specifically, the `makeShapeLLVMCompatible` and `makeShapeTorchCompatible` utilities were being called from `lib/Dialect/Torch/IR/TorchTypes.cpp` and `lib/Dialect/Torch/IR/TorchOps.cpp` defined under the `:TorchMLIRTorchDialect` bazel target, leading it to take a dependency on `:TorchMLIRConversionUtils` which already depends on `:TorchMLIRTorchDialect`, hence creating a circular dependency.
This commit resolves the same by moving said utilities from `lib/Conversion/Utils/Utils.cpp` to `lib/Dialect/Torch/Utils/Utils.cpp`. Please LMK if there's a better way to fix this and I will update the code.
This commit also adds the required targets to support building the new conversions from Torch to ML Program dialect that was introduced in f416953600.
Bazel build GHA triggered manually to verify: https://github.com/sjain-stanford/torch-mlir/actions/runs/3645944517
The current implementation of `DecomposeComplexOps` fails if an op
expected to be decomposed does not get decomposed in the first
iteration of the `createTorchSimplificationPipeline` in
`LowerToBackendContractPass`. However, some graphs require multiple
iterations of `createTorchSimplificationPipeline` to fully propagate
all statically knowable information, such as dtypes and shapes, to the
entire graph, sometimes resulting in the need to run
`DecomposeComplexOps` more than once.
This commit changes `DecomposeComplexOps` to use a greedy algorithm
for pattern application and moves the legalization check of ops to the
`LowerToBackendContractPass` to allow for the `DecomposeComplexOps` to
run more than once.
- Support for non-prefixed accessors has been removed. See:
https://reviews.llvm.org/D136727
- Rename `operands` to `methodOperands` in `prim.CallMethod` since the
name `operands` overlaps with a builtin method name. See:
https://reviews.llvm.org/D136727
- Add passes in refbackend to lower memref.subview. See:
https://reviews.llvm.org/D136377
- Replace `CopyToValueTensorOps` first in `RewriteViewLikeSubgraph` in
maximize-value-semantics.
The current implementation of the `RewriteViewLikeSubgraph` pass in
maximize-value-semantics creates temporarily invalid IR. In
particular, given a forward slice starting from a
`CopyToNonValueTensorOp` and ending in `CopyToValueTensorOp`s, the
pass first replaces all uses of the `CopyToNonValueTensorOp` with
its operand, which results in all the `CopyToValueTensorOp` users
having their operand have type `!torch.vtensor`, which is invalid.
The correct way to do things is to first replace all the
`CopyToValueTensorOp`s with their operand, and then replace all uses
of the `CopyToNonValueTensorOp` with its operand.
This only started failing now because the generated accessor
`getOperand` for the `CopyToValueTensorOp` now returns a
`TypedValue<NonValueTensorType>`, which has an assert checking that
the value returned is of the expected type.
Tiago Trevisan Jost
Yuanqiang Liu
Matthias Gehre
Zhekun Zhang
Abhishek Varma
Sean Silva
Jiawei Wu
Chi_Liu
Maksim Levental
Vivek Khandelwal
Christopher McGirr
JianzheXiao
Ramiro Leal-Cavazos
Gaurav Shukla
TatWai Chong
gpetters94
Prashant Kumar
yifei410
Ze Zhang
Eric Kunze
Roll PyTorch Action
Abhishek Varma
Alexandre Rames
Alexandre Rames
Ziheng Jiang
Michael Feliz
lisaliu1
Jiahao Li
Priya Savithiri
Zachary Cetinic
Ashay Rane
Gleb Kazantaev
Victor Guerra
Raghavan Raman
Srirammaswamy
powderluv
Xiafei Qiu
Shivam Gupta
Tanyo Kwok
zzp_miracle
Chi_Liu
pranavmulticore
ataheridezfouli-groq
Ahmed S. Taei
Sambhav Jain