The ceph osd pool ls detail command is a subset of the ceph osd dump
command.
$ ceph osd dump --format json|wc -c
10117
$ ceph osd pool ls detail --format json|wc -c
4740
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Run the Ceph commands that only gather information (without making any changes
to the cluster) when running Ansible in check mode.
This allows the tasks that depend on the variables set by those tasks to
succeed in check mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The radosgw-sync-overview and rbd-details grafana dashboars were missing
from the list.
Closes: #6758
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using self-signed/untrusted CA certificates, alertmanager displays
an error in logs. With this commit this should make those messages
disappear.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1936299
Co-authored-by: Guillaume Abrioux <gabrioux@redhat.com>
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When the rgw_multisite_proto variable is set to https then we shoudn't use
the IP address in the zone endpoints list but the node FQDN to match the
TLS certificate CN.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1965504
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using python 2 and the task with a loop is skipped then it generates
an error.
Unexpected templating type error occurred on
({{ (pool_list.stdout | from_json)['pools'] }}): expected string or buffer
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The PG autoscaler can disrupt the PG checks so the idea here is to
disable it and re-enable it back after the restart is done.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Populating the ceph_mgr_modules list in the mgr_modules doesn't make sense
since that file is only executed if the list isn't empty or we're using the
dashboard.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We already have config override variables for existing block (like
ganesha_ceph_export_overrides, ganesha_log_overrides, etc...) or a
global one (ganesha_conf_overrides) but redefining the NFS_CORE_PARAM
block in that variable will erase all previous values (currently only
Bind_Addr).
ganesha_core_param_overrides: |
Enable_UDP = false;
NFS_Port = 2050;
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1941775
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When deploying dashboard with ssl certificates generated by
ceph-ansible, we enforce the CN to 'ceph-dashboard' which can makes
application such alertmanager complain like following:
`err="Post https://mgr0:8443/api/prometheus_receiver: x509: certificate is valid for ceph-dashboard, not mgr0" context_err="context deadline exceeded"`
The idea here is to add alternative names matching all mgr/mon instances
in the certificate so this error won't appear in logs.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1978869
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This introduces a new variable `dashboard_network` in order to support
deploying the dashboard on a different subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1927574
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of reusing the condition 'inventory_hostname in groups[osds]'
on each device facts tasks then we can move all the tasks into a
dedicated file and set the condition on the import_tasks statement.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We currently don't check if the logical volume used in lvm_volumes list
for either bluestore data/db/wal or filestore data/journal exist.
We're only doing this on raw devices for batch scenario.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using dedicated devices for db/journal/wal objecstore with
ceph-volume lvm batch then we should also validate that those devices
exist and don't use a gpt partition table in addition of the devices
and lvm_volume.data variables.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using findmnt command to find the device associated to the
root mount point then we can use the ansible_mounts fact.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of doing two parted calls we can check first if the device exist
and then test the partition table.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
2888c08 introduced a regression as the check_devices tasks file was
only included based on the devices variable.
But that file also validate some devices from the lvm_volumes variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1906022
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
All ceph daemons need to have the TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
environment variable set to 128MB by default in container setup.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970913
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Starting RHCS 5, there's no ISO available anymore.
This removes all ISO variables and the ceph_repository_type variable.
Closes: #6626
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It was requested for us to update our alerting definitions to include a
slow OSD Ops health check.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1951664
Signed-off-by: Boris Ranto <branto@redhat.com>
When running the switch-to-containers playbook with multisite enabled,
the fact "rgw_instances" is only set for the node being processed
(serial: 1), the consequence of that is that the set_fact of
'rgw_instances_all' can't iterate over all rgw node in order to look up
each 'rgw_instances_host'.
Adding a condition checking whether hostvars[item]["rgw_instances_host"]
is defined fixes this issue.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1967926
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Enabling lvmetad in containerized deployments on el7 based OS might
cause issues.
This commit make it possible to disable this service if needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955040
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When calling the `ceph_key` module with `state: info`, if the ceph
command called fails, the actual error is hidden by the module which
makes it pretty difficult to troubleshoot.
The current code always states that if rc is not equal to 0 the keyring
doesn't exist.
`state: info` should always return the actual rc, stdout and stderr.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1964889
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When monitors and rgw are collocated with multisite enabled, the
rolling_update playbook fails because during the workflow, we run some
radosgw-admin commands very early on the first mon even though this is
the monitor being upgraded, it means the container doesn't exist since
it was stopped.
This block is relevant only for scaling out rgw daemons or initial
deployment. In rolling_update workflow, it is not needed so let's skip
it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1970232
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When osd nodes are collocated in the clients group (HCI context for
instance), the current logic will exclude osd nodes since they are
present in the client group.
The best fix would be to exclude clients node only when they are not
member of another group but for now, as a workaround, we can enforce
the addition of osd nodes to fix this specific case.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1947695
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Since we need to revert 33bfb10, this is an alternative to initial approach.
We can avoid maintaining this file since it is present in container
image. The idea is to simply get it from the image container and write
it to the host.
Fixes: #6501
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The pg_autoscale_mode for rgw pools introduced in 9f03a52 was wrong
and was missing a `value` keyword because `rgw_create_pools` is a
dict.
Fixes: #6516
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When dashboard_frontend_vip is provided, all the services should be
configured using the related VIP. A new VIP variable is added for
both prometheus and alertmanager: we're already able to properly
config the grafana vip using dashboard_frontend_vip variable.
This change adds the same variable for both prometheus and
alertmanager.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
We should consider bumping ansible version for future releases, so let's
start testing against ansible 2.10
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `set_fact rgw_ports` task was failing due to a templating error, because
`hostvars[item].rgw_instances` is a list, but it was treated as if it was a
dictionary.
Another issue was the fact that the `unique` filter only applied to the list
being appended to `rgw_ports` instead of the entire list, which means it was
possible to have duplicate items.
Lastly, `rgw_ports` would have been a list of integers, but the `seport` module
expects a list of strings.
This commit fixes all of the issues above, allowing the `ceph-rgw-loadbalancer`
role to work on systems with SELinux enabled.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
This adds a `ExecStartPre=-/usr/bin/mkdir -p /var/log/ceph` in all
systemd service templates for all ceph daemon.
This is specific to RHCS after a Leapp upgrade is done. Indeed, the
`/var/log/ceph` seems to be removed after the upgrade.
In order to work around this issue let's ensure the directory is present
before trying to start the containers with podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1949489
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
`configure_mirroring.yml` is called right after the daemon is started.
Sometimes, it can happen the first task in `configure_mirroring.yml` is
run while the daemon isn't yet ready, adding a retries/until on that
task should help to avoid causing the playbook to fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944996
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
when running docker-to-podman playbook, there's no need to call
`ceph-config` and `ceph-rgw` from the role `ceph-handler`.
It can even have side effects when coming from a baremetal cluster that
was previously migrated using the switch-to-containers playbook. Indeed
it might complain about missing .target systemd unit since they are
removed during that migration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This moves some task from the `ceph-nfs` role in `ceph-common` since
some of them are needed in `ceph-rgwloadbalancer` role.
This avoids duplicated tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds all rgw ports to the http_port_t selinux type so it
allows haproxy to connect to those ports in order to avoid AVC.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
haproxy gets an AVC when configured to connect to port 8081
This commit adds a snippet regarding haproxy in a selinux environment
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com>
Pass the password variable via stdin for the registry login
authentication.
This allows to remove the no_log statement and see the task output
without displaying the password value.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Currently NFS Ganesha (ceph-nfs) consumes /etc/idmapd.conf, which
controls mapping of user/owner identities under NFSv4+. With
containerized service deployment, this file is an immutable part of the
container image and cannot be modified.
Here we provide group variables, and a taskk and templates for the
ceph-nfs role, to set the path of the idmap configuration file and
to make the most common adjustment to the contents of that file --
namely to set the 'Domain'. We default the path to /etc/ganesha/idmap.conf
so that we will not conflict with /etc/idmapd.conf on the controller nodes
where ganesha runs. NFSv4 clients, as used for example by the Cinder NFS
driver, consume /etc/idmapd.conf and may require different settings than
what is wanted for NFS Ganesha. Additionally, because we already bind
/etc/ganesha from the host into the ceph-nfs container, the file NFS
Ganesha consumes will no longer be an immutable part of the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925646
Signed-off-by: Tom Barron tpb@dyncloud.net
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit adds the parameter `--storage.tsdb.retention.time` to the
prometheus systemd unit template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1928000
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
In commits 39649f0 and bf8cdad we switch from using the shaman /repos endpoint
to the /search endpoint for using the architecture filter.
In fact that filter is also available with the /repos endpoint, which requires
less ansible tasks.
This also adds back a condition remove in 5801171 on the ceph-iscsi
repository and that repository doesn't need to filter on the architecture
because the ceph-iscsi project is noarch.
Both ceph-iscsi and tcmu-runner shaman URLs were using the ceph_dev_branch
and ceph_dev_sha1 variables which doesn't make sense. Those variables are
only useful for the ceph core repository.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds the possibility to deploy the dashboard with igw nodes using
a dedicated subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1926170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
rbd-mirroring is not configured as adding peer is getting skipped.
Peer addition should not get skipped if its not added already
Closes - https://bugzilla.redhat.com/show_bug.cgi?id=1942444
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
As a continuation of a7f2fa73e6, this
change switches fact injection to off by default in the provided
ansible.cfg.
Signed-off-by: Alex Schultz <aschultz@redhat.com>
due to recent changes in shaman, we must fetch the right repo by
filtering on the desired architecture.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We can end up with an arm only repo unless we are specific about the
architecture we require. Brings the deb code in line with the rpm
equivalent.
Signed-off-by: Brad Hubbard <bhubbard@redhat.com>
when the group `_filtered_clients` is built, the order can change from
the original `clients` group which can cause issues since we run
`ceph-container-engine` on the first client only. It means later in the
playbook we can make call to the container CLI on a node where the
container engine wasn't installed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
this updates the `ceph_repository_community` check in `ceph-validate`
with the right ceph release expected.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit updates the default version of nfs-ganesha to V3.5 which is the
latest version available upstream.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When collocating OSDs with other daemon, `num_osds` is incorrectly calculated
because `ceph-config` is called multiple times.
Indeed, the following code:
```
num_osds: "{{ lvm_list.stdout | default('{}') | from_json | length | int + num_osds | default(0) | int }}"
```
makes `num_osds` be incremented each time `ceph-config` is called.
We have to reset it in order to get the correct number of expected OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds the realm pull operation to the current radosgw_realm module.
The pull operation requires the url, access/secret key variables.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Sometimes it's useful to be able to skip the OSD creation step when
running ceph-ansible (cf #1777). The lvm scenario has a prepare_osd
tag on the relevant play. This commit adds the same tag to the
lvm-batch scenario.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
http://docs.ceph.com/docs/nautilus/radosgw/frontends/ 404s so replace
it with a working "latest" docs link, and correct the spelling of
"additional" while I'm at it.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
the `ceph_cmd` fact is missing the `--net=host` parameter.
Some tasks consuming this fact can fail like following:
```
Error: error configuring network namespace for container b8ec913db1fb694ae683faf202680de7a59c714a004e533aba87e8503d29261f: Missing CNI default network
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1931365
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The monitoring node running grafana needs the rhcs tools repostory
enabled in non containerized deployment to be able to install the
ceph-grafana-dashboards rpm package.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1918650
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
if `rgw_zonegroupmaster` is not defined at the rgw instance level in
`rgw_instances` it will fallback to a wrong variable (`rgw_zonemaster`).
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925247
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Due to recent changes in shaman, there's a chance it returns the wrong
repository from architecture point of view.
We can query shaman and ask for the correct architecture to get around
this.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
There's no need to set the rgw_instances_all fact for each node. We can
rely on run_once for that one.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
We already do that in the other systemd templates (mgr, mds, etc..)
and would present to add workaround in other orchestration tool.
This change is for containerized deployment only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1882724
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
since `ceph-rgw` may be called from `ceph-handler` in some contexts we
should avoid rerunning it unnecessarily.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Add the possibility to deploy rgw multisite configuration with a mix of
secondary and primary zones on a same rgw node.
Before that, on a same node, all instances were either primary
zones *OR* secondary.
Now you can define a rgw instance like following:
```
rgw_instances:
- instance_name: 'rgw0'
rgw_zonemaster: false
rgw_zonesecondary: true
rgw_zonegroupmaster: false
rgw_realm: 'france'
rgw_zonegroup: 'zonegroup-france'
rgw_zone: paris-00
radosgw_address: "{{ _radosgw_address }}"
radosgw_frontend_port: 8080
rgw_zone_user: jacques.chirac
rgw_zone_user_display_name: "Jacques Chirac"
system_access_key: P9Eb6S8XNyo4dtZZUUMy
system_secret_key: qqHCUtfdNnpHq3PZRHW5un9l0bEBM812Uhow0XfB
endpoint: http://192.168.101.12:8080
```
Basically it's now possible to define `rgw_zonemaster`,
`rgw_zonesecondary` and `rgw_zonegroupmaster` at the intsance
level instead of the whole node level.
Also, this commit adds an option `deploy_secondary_zones` (default True)
which can be set to `False` in order to explicitly ask the playbook to
not deploy secondary zones in case where the corresponding endpoint are
not deployed yet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1915478
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This update the grafana container tag to 6.7.4.
The RHCS version is now based on the RHCS 5 container image which is
also based on 6.7.4.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The "latest" ceph container tag references the latest stable release
(octopus at the moment). "latest" is an alias on "latest-octopus".
On the devel branch we should use "latest-master" tag instead.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Due to missing condition on `cephx` variable, cephx disabled deployments
are broken.
This commit fixes this.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1910151
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit checks the length of `virtual_ips` doesn't exceed the length
of `groups[rgwloadbalancer_group_name]`.
It also ensure this variable is defined when
`groups[rgwloadbalancer_group_name]` contains at least one node.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
While 2ca33641 fixed a bug in the way the `keepalived.conf.j2` template matched
hostnames to set the VRRP `MASTER`/`BACKUP` states, it also introduced a
regression in the case where `virtual_ips` is a list of more than one IP
address.
The previous behavior would result in each host in the `rgwloadbalancers` group
to be `MASTER` for one of the `virtual_ips`, but the new behavior caused the
first host to be `MASTER` for all the IP address in `virtual_ips`.
This commit restores the original behavior.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Instead of using the command module for retrieving a sysctl value then
we can use the slurp module and read the value directly from /proc.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The path where ceph.conf is located (/etc/ceph) missing in the Docker container bind mounts, this throws errors
Signed-off-by: Mike Currin <currin@gmail.com>
When collocating rgw with either a mon, mgr or osd, switching from
single site to a multisite rgw setup failed because of the handlers
triggered between the ansible play of the collocated daemon and the play
of the rgw. Since the multisite changes are not yet applied the handlers
fail.
The idea here is to ensure we run the multisite configuration from the
ceph-handler role before the restart happens, this way it won't complain
because of non existing multisite configuration.
(Note: this is also valid when simply changing a multisite configuration)
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1888630
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When creating a new pool, target_size_ratio was ignored by ansible module ceph_pool.py.
target_size_ratio is now used when pg_autoscale_mode is on.
Tests added to library tests.
This adds too the use in the role ceph-rgw.
Signed-off-by: Fabien Brachere <fabien.brachere@celeste.fr>
Since the major ceph-volume lvm batch refactoring, the report value
is different.
Before the refact, the report was a dict with the OSDs list to be created
under the "osds" key.
After the refact, the report is a list of dict.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
set fetch_directory variable in default/main.yml instead of using the
defaults jinja filter in tasks/main.yml.
Fixes: #6072
Signed-off-by: Karl-Heinz Preuß <karl-heinz.preuss@cms.hu-berlin.de>
This reverts commit 4d1fdd2b05.
This breaks the backward compatibility with previous osd_memory_target
calculation and we could have a value lower than the minimum value allowed
(896M) which causes some ceph commands to fail (like ceph assimilate-conf).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The alertmanager, grafana and prometheus configuration file are
generated with the template module which doesn't allow for using
config overrides.
Instead we could use the config_template plugin action and add a
new variable for overrides (one for each component).
With this patch, one should be able to add configuration to
prometheus with the following:
---
alertmanager_conf_overrides:
global:
smtp_smarthost: 'localhost:25'
...
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902999
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
81233dd introduced a regression with the ceph_ec_profile module call in
the ceph-rgw role due the missing cluster module parameter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The conversion fact task was only executed when the grafana_server_group_name
variable was explicitly set in the user configuration. If an user was using
the default value then the conversion wasn't executed.
This also adds back the default grafana_server_group_name value in case user
was using the default value and to avoid undefined variable error.
Instead of hardcoding the "monitoring" group name then we can reuse the
monitoring_group_name variable.
There's no need to override the monitoring_group_name variable, it's either
using the default value or the one defined by the user.
Finally removing the delegate_to statement on the add_host task since it's
always executed on the ansible controller.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1903732
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Since the backing generate_secret() just hands out urandom output,
running as privileged doesn't seem to be required. It's not
desireable to provide sudo in some Ansible runner environments.
Signed-off-by: Jukka Nousiainen <jukka.nousiainen@csc.fi>
Let's discard the ansible lint error 306 and add a "# noqa 306" on tasks
where we don't need `set -o pipefail`
Fixes: #6090
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We should always use the ceph_volume ansible module when possible.
This patch replace the ceph-volume inventory and lvm {list,zap} commands
called via the command/shell modules by the corresponding call with the
ceph_volume module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_crush_rule ansible module for replacing the command
module usage with the ceph osd crush rule commands.
This module can manage both erasure and replicated crush rules.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This allows skipping this task if really desired.
Use it carefully. Use it at your own risk.
Fixes: #6073
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Instead of iterate over all client nodes with a loop sequentially, we
can use the group_by ansible buildin.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
As of podman `2.0.5`, `--cap-add` and `--privileged` are exclusive
options.
```
Nov 30 13:56:30 magna089 podman[171677]: Error: invalid config provided: CapAdd and privileged are mutually exclusive options
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902149
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
As of podman 2.0.5, `--ignore` param conflicts with `--storage`.
```
Nov 30 13:53:10 magna089 podman[164443]: Error: --storage conflicts with --volumes, --all, --latest, --ignore and --cidfile
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This adds ceph_mgr_module ansible module for replacing the command module
usage with the ceph mgr module enable/disable commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Set the owner/group on alertmanager and prometheus directories and
files to nobody and nogroup (uid and gid 65534) to avoid permission
issues.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1901543
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
adding monitor is no longer possible because we generate a new mon
keyring each time the playbook is run.
Fixes: #5864
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
When using a custom pool for iSCSI gateway then we need to set the pool
name in the configuration otherwise the default rbd pool name will be
used.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit ensures that the `/var/lib/ceph/osd/{{ cluster }}-{{ osd_id }}` is
present before starting OSDs.
This is needed specificly when redeploying an OSD in case of OS upgrade
failure.
Since ceph data are still present on its devices then the node can be
redeployed, however those directories aren't present since they are
initially created by ceph-volume. We could recreate them manually but
for better user experience we can ask ceph-ansible to recreate them.
NOTE:
this only works for OSDs that were deployed with ceph-volume.
ceph-disk deployed OSDs would have to get those directories recreated
manually.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1898486
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
We don't need to use run_once on that task when having running monitors
otherwise the read task could be skip and the set task will fail.
The conditional check 'crush_rule_variable.rc == 0' failed. The error
was: error while evaluating conditional (crush_rule_variable.rc == 0):
'dict object' has no attribute 'rc'
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1898856
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This commit changes the bind mount option for the mount point
`/var/lib/ceph` in the systemd template for mon and mgr containers. This
is needed in case of collocating mon/mgr with osds using dmcrypt
scenario.
Once mon/mgr got converted to containers, the dmcrypt layer sub mount is
still seen in `/var/lib/ceph`. For some reason it makes the
corresponding devices busy so any other container can't open/close it.
As a result, it prevents osds from starting properly.
Since it only happens on the nodes converted before the OSD play, the idea is
to bind mount `/var/lib/ceph` on mon and mgr with the `rshared` option
so once the sub mount is unmounted, it is propagated inside the
container so it doesn't see that mount point.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896392
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The `osd_pool_default_crush_rule` is set based on `crush_rule_variable`, which
is the output of a `grep` command.
However, two consecutive tasks can set that variable, and if the second task is
skipped, it still overwrites the `crush_rule_variable`, leading the
`osd_pool_default_crush_rule` to be set to `ceph_osd_pool_default_crush_rule`
instead of the output of the first task.
This commit ensures that the fact is set right after the `crush_rule_variable`
is assigned, before it can be overwritten.
Closes#5912
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
This sets the `dashboard_grafana_api_no_ssl_verify` default value
according to the length of `dashboard_crt` and `dashboard_key`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
If some OSDs are to be created and others already exist the calculation
only counted the to be created OSDs. This changes the calculation to
take all OSDs into account.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the rgw/rbdmirror services status, we're only using the
servicmap structure in the ceph status output.
To optimize this, we could use the ceph service dump command which contains
the same needed information.
This command returns less information and is slightly faster than the ceph
status command.
$ ceph status -f json | wc -c
2001
$ ceph service dump -f json | wc -c
1105
$ time ceph status -f json > /dev/null
real 0m0.557s
user 0m0.516s
sys 0m0.040s
$ time ceph service dump -f json > /dev/null
real 0m0.454s
user 0m0.434s
sys 0m0.020s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Improve the checked way of the OSD created checking process.
This replaces the ceph status command by the ceph osd stat command.
The osdmap structure isn't needed anymore.
$ ceph status -f json | wc -c
2001
$ ceph osd stat -f json | wc -c
132
$ time ceph status -f json > /dev/null
real 0m0.563s
user 0m0.526s
sys 0m0.036s
$ time ceph osd stat -f json > /dev/null
real 0m0.457s
user 0m0.411s
sys 0m0.045s
Signed-off-by: wangxiaotong <wangxiaotong@fiberhome.com>
After rolling updates performed with
`infrastructure-playbooks/rolling_updates.yml`, files located in
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` had mode 0755 (including
the keyring), making them world-readable.
This commit separates the task that configured permissions recursively on
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` into two separate tasks:
1. Set the ownership and mode of the directory itself;
2. Recursively set ownership in the directory, but don't modify the mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Instead of using ceph auth get-or-create command via the ansible command
module then we can use the ceph_key module.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Instead of using ceph auth get command via the ansible command module
then we can use the ceph_key module and the info state.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Otherwise this task fails if no permission is set on the item.
Previously the code omited the mode parameter if it was not set, but
this was lost with commit ab370b6ad8.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When using the curl command with ipv6 address and brackets then we need
to use the -g option otherwise the command fails.
$ curl http://[fdc2:328:750b:6983::6]:8080
curl: (3) [globbing] error: bad range specification after pos 9
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This file is currently deployed with '0644' ownership making this file
readable by any user on the system.
Since it contains sensitive information it should be readable by the
owner only.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890119
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Correctly set `osd_ids_non_container.stdout_lines` to an empty list if it's
undefined (i.e. in check mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
The current task installs the ceph-crash key to "most" hosts via
"delegate_to". This key is only used by the ceph-crash daemon and should
just be installed on all hosts targeted by this role. There is no need
for using a delegated task.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
The service should be started after the ceph-osd systemd overrides has
been added, otherwise, the latter isn't considered.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1860739
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
The container_binding_name package was only mandatory when we were
using the docker modules (docker_image and docker_container) but since
we manage both docker and podman containers without using the dedicated
module then we can remove it.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
Using the + operation on two lists doesn't filter out the duplicate
keys.
Currently each OSDs is started (via systemd) twice.
Instead we could use the union filter.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
the `stat --printf=%n` returns something like following:
```
ok: [osd0] => changed=false
cmd: |-
stat --printf=%n /var/run/ceph/ceph-osd*.asok
delta: '0:00:00.009388'
end: '2020-10-06 06:18:28.109500'
failed_when_result: false
rc: 0
start: '2020-10-06 06:18:28.100112'
stderr: ''
stderr_lines: <omitted>
stdout: /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
stdout_lines: <omitted>
```
it makes the next task "check if the ceph osd socket is in-use" grep
like this:
```
ok: [osd0] => changed=false
cmd:
- grep
- -q
- /var/run/ceph/ceph-osd.2.asok/var/run/ceph/ceph-osd.5.asok
- /proc/net/unix
```
which will obviously fail because this path never exists. It makes the
OSD handler broken.
Let's use `find` module instead.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Make sure the `site.yml.sample` playbook can be run in check mode by skipping
tasks that try to read the output of commands that have been skipped.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
This adds radosgw_zone ansible module for replacing the command module
usage with the radosgw-admin zone command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_zonegroup ansible module for replacing the command
module usage with the radosgw-admin zonegroup command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_realm ansible module for replacing the command module
usage with the radosgw-admin realm command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds radosgw_user ansible module for replacing the command module
usage with the radosgw-admin user command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
This adds the ceph_fs ansible module for replacing the command module
usage with the ceph fs command.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
It's time to remove this backward compatibility. Users had enough time
to convert their openstack_keys and key values.
We now fail in ceph-validate if the caps key isn't set.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
When rgw and osd are collocated, the current workflow prevents from
scaling out the radosgw_num_instances parameter when rerunning the
playbook in baremetal deployments.
When ceph-osd notifies handlers, it means rgw handlers are triggered
too. The issue with this is that they are triggered before the role
ceph-rgw is run.
In the case a scaleout operation is expected on `radosgw_num_instances`
it causes an issue because keyrings haven't been created yet so the new
instances won't start.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881313
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Dimitri Savineau
Benoît Knecht
Guillaume Abrioux
Boris Ranto
Neelaksh Singh
Seena Fallah
Francesco Pantano
kalebskeithley
VasishtaShastry
Alex Schultz
Brad Hubbard
Matthew Vernon
Mike Currin
Fabien Brachere
Karl-Heinz Preuß
Jukka Nousiainen
Gaudenz Steinlin
wangxiaotong