We must call `container_exec_cmd` from the right monitor node otherwise
the value of the fact might mistmatch between the delegated node and the
node being played.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794900
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2f919f8971)
When the PV is already removed from the devices then we should not fail
to avoid errors like:
stderr: No PV found on device /dev/sdb.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a9c2300545)
Given that we delegate to the first monitor, we must read the value of
`container_exec_cmd` from this node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit eb9112d8fb)
fact 'running_mon' is set once 'grep' successfully exits with 'rc == 0'
Signed-off-by: Vytenis Sabaliauskas <vytenis.sabaliauskas@protonmail.com>
(cherry picked from commit ed1eaa1f38)
On HCI environment the OSD and Client nodes are collocated. Because we
aren't running the ceph-container-common role on the client nodes except
the first one (for keyring purpose) then the ceph-role execution fails
due to undefined variables.
Closes: #4970
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1794195
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 671b1aba3c)
When upgrading from RHCS 3.x where ceph-metrics was deployed on a
dedicated node to RHCS 4.0, it fails like following:
```
fatal: [magna005]: FAILED! => changed=false
gid: 0
group: root
mode: '0755'
msg: 'chown failed: failed to look up user ceph'
owner: root
path: /etc/ceph
secontext: unconfined_u:object_r:etc_t:s0
size: 4096
state: directory
uid: 0
```
because we are trying to run `ceph-config` on this node, it doesn't make
sense so we should simply run this play on all groups except
`[grafana-server]`.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1793885
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e5812fe45b)
When osd_auto_discovery is set then we need to refresh the
ansible_devices fact between after the filestore OSD purge
otherwise the devices fact won't be populated.
Also remove the gpt header on ceph_disk_osds_devices because
the devices is empty at this point for osd_auto_discovery.
Adding the bool filter when needed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1729267
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bb3eae0c80)
We still need --destroy when using a raw device otherwise we won't be
able to recreate the lvm stack on that device with bluestore.
Running command: /usr/sbin/vgcreate -s 1G --force --yes ceph-bdc67a84-894a-4687-b43f-bcd76317580a /dev/sdd
stderr: Physical volume '/dev/sdd' is already in volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
Unable to add physical volume '/dev/sdd' to volume group 'ceph-b7801d50-e827-4857-95ec-3291ad6f0151'
/dev/sdd: physical volume not initialized.
--> Was unable to complete a new OSD, will rollback changes
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792227
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f995b079a6)
Because we need to manage legacy ceph-disk based OSD with ceph-volume
then we need a way to know the osd_objectstore in the container.
This was done like this previously with ceph-disk so we should also
do it with ceph-volume.
Note that this won't have any impact for ceph-volume lvm based OSD.
Rename docker_env_args fact to container_env_args and move the container
condition on the include_tasks call.
Remove OSD_DMCRYPT env variable from the ceph-osd template because it's
now included in the container_env_args variable.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792122
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit c9e1fe3d92)
In 3c31b19ab3, I fixed the `customize pool
size` task by replacing `item.size` with `item.value.size`. However, I
missed the same issue in the `when` condition.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3842aa1a30)
When unsetting the noup flag, we must call container_exec_cmd from the
delegated node (first mon member)
Also, adding a `run_once: true` because this task needs to be run only 1
time.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1792320
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 22865cde9c)
Iterating over all monitors in order to delegate a `
{{ container_binary }}` fails when collocating mgrs with mons, because
ceph-facts reset `container_exec_cmd` to point to the first member of
the monitor group.
The idea is to force `container_exec_cmd` to be reset in ceph-mgr.
This commit also removes the `container_exec_cmd_mgr` fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1791282
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 8dcbcecd71)
the new ceph status registered in `ceph_status` will report `fsmap.up` =
0 when it's the last mds given that it's done after we shrink the mds,
it means the condition is wrong. Also adding a condition so we don't try
to delete the fs if a standby node is going to rejoin the cluster.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787543
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3d0898aa5d)
The trusted_ip_list parameter for the rbd-target-api service doesn't
support ipv6 address with bracket.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787531
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit bd87d69183)
Before this patch, the lvm2 package installation was done during the
ceph-osd role.
However we were running ceph-volume command in the ceph-config role
before ceph-osd. If lvm2 wasn't installed then the ceph-volume command
fails:
error checking path "/run/lock/lvm": stat /run/lock/lvm: no such file or
directory
This wasn't visible before because lvm2 was automatically installed as
docker dependency but it's not the same for podman on CentOS 8.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit de8f2a9f83)
since fd1718f379, we must use `_devices`
when deploying with lvm batch scenario.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5558664f37)
There is no need to run this part of the playbook when upgrading the
cluter.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit af6875706a)
This commit replaces the playbook used for add_osds job given
accordingly to the add-osd.yml playbook removal
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fef1cd4c4b)
This commit lets add-osd.yml in place but mark the deprecation of the
playbook.
Scaling up OSDs is now possible using --limit
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3496a0efa2)
We don't need to executed the grafana fact everytime but only during
the dashboard deployment.
Especially for ceph-grafana, ceph-prometheus and ceph-dashboard roles.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790303
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit f940e695ab)
To avoid confusion, let's change the default value from `0.0.0.0` to
`x.x.x.x`.
Users might think setting `0.0.0.0` will make the daemon binding on all
interfaces.
Fixes: #4827
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fc02fc98eb)
This commit refact the condition in the loop of that task so all
potential osd ids found are well started.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1790212
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 58e6bfed2d)
Add a script to retry several times to fire up VMs to avoid vagrant
failures.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Andrew Schoen <aschoen@redhat.com>
(cherry picked from commit 1ecb3a9352)
This commit adds a new scenario in order to test docker-to-podman.yml
migration playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit dc672e86ec)
play vars have lower precedence than role vars and `set_fact`.
We must use a `set_fact` to reset these variables.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b0c491800a)
This is needed after a change is made in systemd unit files.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 1c2ec9fb40)
This commit adds a package installation task in order to install podman
during the docker-to-podman.yml migration playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d746575fd0)
There is no need to run these tasks n times from each monitor.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c878e99589)
1. set noout and nodeep-scrub flags,
2. upgrade each OSD node, one by one, wait for active+clean pgs
3. after all osd nodes are upgraded, unset flags
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
Co-authored-by: Rachana Patel <racpatel@redhat.com>
(cherry picked from commit 548db78b95)
When ceph_rbd_mirror_configure is set to true we need to ensure that
the required variables aren't empty.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1760553
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 4a065cebd7)
cf8c6a3 moves the 'wait for all osds' task from openstack_config to the
main tasks list.
But the openstack_config code was executed only on the last OSD node.
We don't need to do this check on all OSD node so we need to add set
run_once to true on that task.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5bd1cf40eb)
When creating crush rules with device class parameter we need to be sure
that all OSDs are up and running because the device class list is
is populated with this information.
This is now enable for all scenario not openstack_config only.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit cf8c6a3849)
This adds device class support to crush rules when using the class key
in the rule dict via the create-replicated sub command.
If the class key isn't specified then we use the create-simple sub
command for backward compatibility.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1636508
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ef2cb99f73)
If we want to create crush rules with the create-replicated sub command
and device class then we need to have the OSD created before the crush
rules otherwise the device classes won't exist.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ed36a11eab)
We only need to have the container_binary fact. Because we're not
gathering the facts from all nodes then the purge fails trying to get
one of the grafana fact.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786686
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a09d1c38bf)
There's some tasks using the new container image during the rolling
upgrade playbook that needs to execute the registry login first otherwise
the nodes won't be able to pull the container image.
Unable to find image 'xxx.io/foo/bar:latest' locally
Trying to pull repository xxx.io/foo/bar ...
/usr/bin/docker-current: Get https://xxx.io/v2/foo/bar/manifests/latest:
unauthorized
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3f344fdefe)
We must exclude the devices already used and prepared by ceph-disk when
doing the lvm batch report. Otherwise it fails because ceph-volume
complains about GPT header.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786682
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit fd1718f379)
Instead of running the ceph roles against localhost we should do it
on the first mon.
The ansible and inventory hostname of the rgw nodes could be different.
Ensure that the rgw instance to remove is present in the cluster.
Fix rgw service and directory path.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1677431
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 747555dfa6)
We must pick up a mon which actually exists in ceph-facts in order to
detect if a cluster is running. Otherwise, it will state no cluster is
already running which will end up deploying a new monitor isolated in a
new quorum.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 86f3eeb717)
Only the ipv4 addresses from the nodes running the dashboard mgr module
were added to the trusted_ip_list configuration file on the iscsigws
nodes.
This also add the iscsi gateways with ipv6 configuration to the ceph
dashboard.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1787531
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 70eba66182)
RadosGW pools can be created by setting
```yaml
rgw_create_pools:
.rgw.root:
pg_num: 512
size: 2
```
for instance. However, doing so would create pools of size
`osd_pool_default_size` regardless of the `size` value. This was due to
the fact that the Ansible task used
```
{{ item.size | default(osd_pool_default_size) }}
```
as the pool size value, but `item.size` is always undefined; the
correct variable is `item.value.size`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 3c31b19ab3)
411bd07d54 introduced a bug in handlers
using `handler_*_status` instead of `hostvars[item]['handler_*_status']`
causes handlers to be triggered in anycase even though
`handler_*_status` was set to `False` on a specific node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1622688
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 30200802d9)
Since RHEL 8.1 we need to add the ganesha_t type to the permissive
SELinux list.
Otherwise the nfs-ganesha service won't start.
This was done on RHEL 7 previously and part of the nfs-ganesha-selinux
package on RHEL 8.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786110
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit d758125290)
When using fqdn in inventory, that playbook fails because of some tasks
using the result of ceph osd tree (which returns shortname) to get
some datas in hostvars[].
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1779021
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6d9ca6b05b)
The grafana-server group name was hardcoded for the grafana/prometheus
firewalld tasks condition.
We should we the associated variable : grafana_server_group_name
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 2c06678cde)
Guillaume Abrioux
Dimitri Savineau
Vytenis Sabaliauskas
Benoît Knecht
Dmitriy Rabotyagov