Since the major ceph-volume lvm batch refactoring, the report value
is different.
Before the refact, the report was a dict with the OSDs list to be created
under the "osds" key.
After the refact, the report is a list of dict.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 827b23353f)
This adds ceph_osd_flag ansible module for replacing the command module
usage with the ceph osd set/unset commands.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 5da593604a)
When using a custom pool for iSCSI gateway then we need to set the pool
name in the configuration otherwise the default rbd pool name will be
used.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 40a87c4b92)
This commit changes the bind mount option for the mount point
`/var/lib/ceph` in the systemd template for mon and mgr containers. This
is needed in case of collocating mon/mgr with osds using dmcrypt
scenario.
Once mon/mgr got converted to containers, the dmcrypt layer sub mount is
still seen in `/var/lib/ceph`. For some reason it makes the
corresponding devices busy so any other container can't open/close it.
As a result, it prevents osds from starting properly.
Since it only happens on the nodes converted before the OSD play, the idea is
to bind mount `/var/lib/ceph` on mon and mgr with the `rshared` option
so once the sub mount is unmounted, it is propagated inside the
container so it doesn't see that mount point.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896392
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f5ba6d9b01)
Set the owner/group on alertmanager and prometheus directories and
files to nobody and nogroup (uid and gid 65534) to avoid permission
issues.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1901543
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit eb452d35bc)
`ceph.target` should be disabled only. Otherwise, in collocation
scenario you stop other collocated services in the OSD play which isn't
what we want to do. Each daemon has its corresponding play for managing
the transition to container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1901865
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0b05620597)
This allows skipping this task if really desired.
Use it carefully. Use it at your own risk.
Fixes: #6073
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5c4ae5356d)
Since the fetch_directory variable has been dropped then we don't need
the override in rhcs file.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a2cbab16a4)
Since the backing generate_secret() just hands out urandom output,
running as privileged doesn't seem to be required. It's not
desireable to provide sudo in some Ansible runner environments.
Signed-off-by: Jukka Nousiainen <jukka.nousiainen@csc.fi>
(cherry picked from commit eb7473491b)
This reverts commit 4d1fdd2b05.
This breaks the backward compatibility with previous osd_memory_target
calculation and we could have a value lower than the minimum value allowed
(896M) which causes some ceph commands to fail (like ceph assimilate-conf).
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit aa6e1f20ea)
Use global crush_device_class variable if it's not set per OSD
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 5e9444fa5c)
set fetch_directory variable in default/main.yml instead of using the
defaults jinja filter in tasks/main.yml.
Fixes: #6072
Signed-off-by: Karl-Heinz Preuß <karl-heinz.preuss@cms.hu-berlin.de>
(cherry picked from commit 6ce34ef59f)
This commit cleans up the `main.yml` task file of `ceph-config`.
It drops the local ceph.conf generation.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 900c0f4492)
Currently we create an object from the primary sites but we try to read
that object still from the master which doesn't make sense, we should
try to read it from a secondary site.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e2ea403d5e)
This adds mergify configuration file on `stable-4.0` branch so we can
get backports automatically created by mergify.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
adding monitor is no longer possible because we generate a new mon
keyring each time the playbook is run.
Fixes: #5864
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902281
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 970c6a4ee6)
Most ansible module using a state parameter default to the present
value (when available) instead of using it as a mandatory option.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit abb4023d76)
Currently the `ceph_key` module doesn't support using a different
keyring than `client.admin`.
This commit adds the possibility to use a different keyring.
Usage:
```
ceph_key:
name: "client.rgw.myrgw-node.rgw123"
cluster: "ceph"
user: "client.bootstrap-rgw"
user_key: /var/lib/ceph/bootstrap-rgw/ceph.keyring
dest: "/var/lib/ceph/radosgw/ceph-rgw.myrgw-node.rgw123/keyring"
caps:
osd: 'allow rwx'
mon: 'allow rw'
import_key: False
owner: "ceph"
group: "ceph"
mode: "0400"
```
Where:
`user` corresponds to `-n (--name)`
`user_key` corresponds to `-k (--keyring)`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 12e6260266)
Running the `ceph_crush.py`, `ceph_key.py` or `ceph_volume.py` modules in check
mode resulted in the following error:
```
New-style module did not handle its own exit
```
This was due to the fact that they simply returned a `dict` in that case,
instead of calling `module.exit_json()`.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 85dd405814)
This commit refactors the code to remove a duplicate condition and it
makes the `state: absent` code idempotent
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 13e2311cbe)
As of podman `2.0.5`, `--cap-add` and `--privileged` are exclusive
options.
```
Nov 30 13:56:30 magna089 podman[171677]: Error: invalid config provided: CapAdd and privileged are mutually exclusive options
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1902149
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d40dd764e0)
As of podman 2.0.5, `--ignore` param conflicts with `--storage`.
```
Nov 30 13:53:10 magna089 podman[164443]: Error: --storage conflicts with --volumes, --all, --latest, --ignore and --cidfile
```
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c68b124ba8)
Since this variable makes it possible to customize the mode for ceph
directories, let's make it a bit more explicit by adding a default value
in ceph-defaults.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 483adb5d79)
This commit ensures that the `/var/lib/ceph/osd/{{ cluster }}-{{ osd_id }}` is
present before starting OSDs.
This is needed specificly when redeploying an OSD in case of OS upgrade
failure.
Since ceph data are still present on its devices then the node can be
redeployed, however those directories aren't present since they are
initially created by ceph-volume. We could recreate them manually but
for better user experience we can ask ceph-ansible to recreate them.
NOTE:
this only works for OSDs that were deployed with ceph-volume.
ceph-disk deployed OSDs would have to get those directories recreated
manually.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1898486
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 873fc8ec0f)
We don't need to use run_once on that task when having running monitors
otherwise the read task could be skip and the set task will fail.
The conditional check 'crush_rule_variable.rc == 0' failed. The error
was: error while evaluating conditional (crush_rule_variable.rc == 0):
'dict object' has no attribute 'rc'
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1898856
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit e150df789e)
This commit enforces the pytest-rerunfailures installed so it's <9.0
This is to avoid the following error:
```
ERROR: pytest-rerunfailures 9.0 has requirement pytest>=5.0, but you'll have pytest 4.6.11 which is incompatible.
```
latest version of pytest-rerunfailures isn't compatible with the version
of pytest we are using.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 19097026fb)
This is a workaround to avoid error like following:
```
Error: error creating container storage: the container name "ceph-mgr-magna022" is already in use by "4a5f674e113f837a0cc561dea5d2cd55d16ca159a647b7794ab06c4c276ef701"
```
that doesn't seem to be 100% reproducible but it shows up after a
reboot. The only workaround we came up with at the moment is to run
`podman rm --storage <container>` before starting it.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1887716
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5ba7824c55)
fa2bb3a only fix the symlink owner/group issue in the OSD play. If the
OSDs are collocated with other services like MONs and MGRs then the
chown command will fail.
$ find /var/lib/ceph/osd/ceph-0 -not -user 167 -execdir chown 167:167 {} +
chown: cannot dereference './block': Permission denied
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1896448
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 35ed9977aa)
The osd_memory_target variable was only used if it was higher than the
calculated value based on the number of OSDs. This is changed to always
use the value if it is set in the configuration. This allows this value
to be intentionally set lower so that it does not have to be changed
when more OSDs are added later.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 4d1fdd2b05)
The `osd_pool_default_crush_rule` is set based on `crush_rule_variable`, which
is the output of a `grep` command.
However, two consecutive tasks can set that variable, and if the second task is
skipped, it still overwrites the `crush_rule_variable`, leading the
`osd_pool_default_crush_rule` to be set to `ceph_osd_pool_default_crush_rule`
instead of the output of the first task.
This commit ensures that the fact is set right after the `crush_rule_variable`
is assigned, before it can be overwritten.
Closes#5912
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit c5f7343a2f)
There are some use cases where there's a need to skip the execution
of the ceph-ansible client role even though the client section of the
inventory isn't empty.
This can happen in contexts where the services are colocated or when
a all-in-one deployment is performed.
The purpose of this change is adding a 'ceph_client' tag to avoid
altering the ceph-ansible execution flow but at the same time be able
to include or exclude a set of tasks using this tag.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit fafd5f871a)
When deploying the ceph OSD via the packages then the ceph-osd@.service
unit is configured as enabled-runtime.
This means that each ceph-osd service will inherit from that state.
The enabled-runtime systemd state doesn't survive after a reboot.
For non containerized deployment the OSD are still starting after a
reboot because there's the ceph-volume@.service and/or ceph-osd.target
units that are doing the job.
$ systemctl list-unit-files|egrep '^ceph-(volume|osd)'|column -t
ceph-osd@.service enabled-runtime
ceph-volume@.service enabled
ceph-osd.target enabled
When switching to containerized deployment we are stopping/disabling
ceph-osd@XX.servive, ceph-volume and ceph.target and then removing the
systemd unit files.
But the new systemd units for containerized ceph-osd service will still
inherit from ceph-osd@.service unit file.
As a consequence, if an OSD host is rebooting after the playbook execution
then the ceph-osd service won't come back because they aren't enabled at
boot.
This patch also adds a reboot and testinfra run after running the switch
to container playbook.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1881288
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit fa2bb3af86)
This sets the `dashboard_grafana_api_no_ssl_verify` default value
according to the length of `dashboard_crt` and `dashboard_key`.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5cadfea42e)
If some OSDs are to be created and others already exist the calculation
only counted the to be created OSDs. This changes the calculation to
take all OSDs into account.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 15044da030)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the cluster health, we're using the health structure in the
ceph status output.
To optimize this, we could use the ceph health command which contains
the same needed information.
$ ceph status -f json | wc -c
2001
$ ceph health -f json | wc -c
46
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit acddf4fb67)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the rgw/rbdmirror services status, we're only using the
servicmap structure in the ceph status output.
To optimize this, we could use the ceph service dump command which contains
the same needed information.
This command returns less information and is slightly faster than the ceph
status command.
$ ceph status -f json | wc -c
2001
$ ceph service dump -f json | wc -c
1105
$ time ceph status -f json > /dev/null
real 0m0.557s
user 0m0.516s
sys 0m0.040s
$ time ceph service dump -f json > /dev/null
real 0m0.454s
user 0m0.434s
sys 0m0.020s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 3f9081931f)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the quorum status, we're only using the quorum_names
structure in the ceph status output.
To optimize this, we could use the ceph quorum_status command which contains
the same needed information.
This command returns less information.
$ ceph status -f json | wc -c
2001
$ ceph quorum_status -f json | wc -c
957
$ time ceph status -f json > /dev/null
real 0m0.577s
user 0m0.538s
sys 0m0.029s
$ time ceph quorum_status -f json > /dev/null
real 0m0.544s
user 0m0.527s
sys 0m0.016s
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 88f91d8c12)
The ceph status command returns a lot of information stored in variables
and/or facts which could consume resources for nothing.
When checking the pgs state, we're using the pgmap structure in the ceph
status output.
To optimize this, we could use the ceph pg stat command which contains
the same needed information.
This command returns less information (only about pgs) and is slightly
faster than the ceph status command.
$ ceph status -f json | wc -c
2000
$ ceph pg stat -f json | wc -c
240
$ time ceph status -f json > /dev/null
real 0m0.529s
user 0m0.503s
sys 0m0.024s
$ time ceph pg stat -f json > /dev/null
real 0m0.426s
user 0m0.409s
sys 0m0.016s
The data returned by the ceph status is even bigger when using the
nautilus release.
$ ceph status -f json | wc -c
35005
$ ceph pg stat -f json | wc -c
240
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit ee50588590)
Improve the checked way of the OSD created checking process.
This replaces the ceph status command by the ceph osd stat command.
The osdmap structure isn't needed anymore.
$ ceph status -f json | wc -c
2001
$ ceph osd stat -f json | wc -c
132
$ time ceph status -f json > /dev/null
real 0m0.563s
user 0m0.526s
sys 0m0.036s
$ time ceph osd stat -f json > /dev/null
real 0m0.457s
user 0m0.411s
sys 0m0.045s
Signed-off-by: wangxiaotong <wangxiaotong@fiberhome.com>
(cherry picked from commit b9cb0f12e9)
After rolling updates performed with
`infrastructure-playbooks/rolling_updates.yml`, files located in
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` had mode 0755 (including
the keyring), making them world-readable.
This commit separates the task that configured permissions recursively on
`/var/lib/ceph/mon/{{ cluster }}-{{ monitor_name }}` into two separate tasks:
1. Set the ownership and mode of the directory itself;
2. Recursively set ownership in the directory, but don't modify the mode.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 0d76826bbb)
Otherwise this task fails if no permission is set on the item.
Previously the code omited the mode parameter if it was not set, but
this was lost with commit ab370b6ad8.
Signed-off-by: Gaudenz Steinlin <gaudenz.steinlin@cloudscale.ch>
(cherry picked from commit 79ff79c422)
Since we've changed to podman configuration using the detach mode and
systemd type to forking then the container logs aren't present in the
journald anymore.
The default conmon log driver is using k8s-file.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1890439
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit 16cd183b9c)
Dimitri Savineau
Guillaume Abrioux
Jukka Nousiainen
Seena Fallah
Karl-Heinz Preuß
Benoît Knecht
Gaudenz Steinlin
Francesco Pantano
wangxiaotong