This is a workaround for an issue in ansible.
When trying to stop/mask/disable this service in one task, the stop
didn't actually happen, the task doesn't fail but for some reason the
container is still present and running.
Then the task starting the service in the role ceph-crash fails because
it can't start the container since it's already running with the same
name.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1955393
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3db1ea7ec4)
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES is for both bluestore and filestore
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
(cherry picked from commit 41295f0ef6)
ceph-ansible leaves a ceph-crash container in containerized deployment.
It means we end up with 2 ceph-crash containers running after the
migration playbook is complete.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1954614
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 22c18e82f0)
Skip the `get initial keyring when it already exists` task when both commands
whose `stdout` output it requires have been skipped (e.g. when running in check
mode).
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit 2437f14581)
When dashboard_frontend_vip is provided, all the services should be
configured using the related VIP. A new VIP variable is added for
both prometheus and alertmanager: we're already able to properly
config the grafana vip using dashboard_frontend_vip variable.
This change adds the same variable for both prometheus and
alertmanager.
Signed-off-by: Francesco Pantano <fpantano@redhat.com>
(cherry picked from commit 441651638d)
The `set_fact rgw_ports` task was failing due to a templating error, because
`hostvars[item].rgw_instances` is a list, but it was treated as if it was a
dictionary.
Another issue was the fact that the `unique` filter only applied to the list
being appended to `rgw_ports` instead of the entire list, which means it was
possible to have duplicate items.
Lastly, `rgw_ports` would have been a list of integers, but the `seport` module
expects a list of strings.
This commit fixes all of the issues above, allowing the `ceph-rgw-loadbalancer`
role to work on systems with SELinux enabled.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit c078513475)
When collocating daemons, if we chown all files under `/var/lib/ceph` it
can cause issues for the collocated daemons that wouldn't have been
migrated yet.
This commit makes the playbook chown only the files corresponding to the
daemon being migrated.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ddbc11c4a9)
This adds a `ExecStartPre=-/usr/bin/mkdir -p /var/log/ceph` in all
systemd service templates for all ceph daemon.
This is specific to RHCS after a Leapp upgrade is done. Indeed, the
`/var/log/ceph` seems to be removed after the upgrade.
In order to work around this issue let's ensure the directory is present
before trying to start the containers with podman.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1949489
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit bab403b603)
This removes the fact `skipped_nodes` which is useless when we run with
`--limit` since it gets reset when a new iteration is made.
Instead, let's print within a final play which node has been skipped
reusing the `skip_this_node` fact.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 3d4267051f)
`configure_mirroring.yml` is called right after the daemon is started.
Sometimes, it can happen the first task in `configure_mirroring.yml` is
run while the daemon isn't yet ready, adding a retries/until on that
task should help to avoid causing the playbook to fail.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944996
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b1e7e1ad0f)
when running docker-to-podman playbook, there's no need to call
`ceph-config` and `ceph-rgw` from the role `ceph-handler`.
It can even have side effects when coming from a baremetal cluster that
was previously migrated using the switch-to-containers playbook. Indeed
it might complain about missing .target systemd unit since they are
removed during that migration.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1944999
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 70f19be367)
this adds a small documentation in the header of the playbook in order
to explain what is the goal of this playbook.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 36b4227dcd)
This moves some task from the `ceph-nfs` role in `ceph-common` since
some of them are needed in `ceph-rgwloadbalancer` role.
This avoids duplicated tasks.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit d0442d81b9)
This adds all rgw ports to the http_port_t selinux type so it
allows haproxy to connect to those ports in order to avoid AVC.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 6bbb90198b)
haproxy gets an AVC when configured to connect to port 8081
This commit adds a snippet regarding haproxy in a selinux environment
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1923890
Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com>
(cherry picked from commit 9e7f22a071)
Pass the password variable via stdin for the registry login
authentication.
This allows to remove the no_log statement and see the task output
without displaying the password value.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
(cherry picked from commit a0e1a450d3)
Support enabling/disabling the pg autoscaler for rgw pools.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 9f03a527ba)
This commit adds the parameter `--storage.tsdb.retention.time` to the
prometheus systemd unit template.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1928000
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b60c61ce45)
Currently NFS Ganesha (ceph-nfs) consumes /etc/idmapd.conf, which
controls mapping of user/owner identities under NFSv4+. With
containerized service deployment, this file is an immutable part of the
container image and cannot be modified.
Here we provide group variables, and a taskk and templates for the
ceph-nfs role, to set the path of the idmap configuration file and
to make the most common adjustment to the contents of that file --
namely to set the 'Domain'. We default the path to /etc/ganesha/idmap.conf
so that we will not conflict with /etc/idmapd.conf on the controller nodes
where ganesha runs. NFSv4 clients, as used for example by the Cinder NFS
driver, consume /etc/idmapd.conf and may require different settings than
what is wanted for NFS Ganesha. Additionally, because we already bind
/etc/ganesha from the host into the ceph-nfs container, the file NFS
Ganesha consumes will no longer be an immutable part of the container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1925646
Signed-off-by: Tom Barron tpb@dyncloud.net
Co-Authored-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 2db2208e40)
This add a quick documentation in ceph-defaults about `igw_network`
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c5728bdc63)
Playbook must fail anyway, the `rescue` block has been introduced for
unmasking the unit after the playbook has failed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e9ddb972fe)
This adds the possibility to deploy the dashboard with igw nodes using
a dedicated subnet.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1926170
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c33de174f1)
rbd-mirroring is not configured as adding peer is getting skipped.
Peer addition should not get skipped if its not added already
Closes - https://bugzilla.redhat.com/show_bug.cgi?id=1942444
Signed-off-by: VasishtaShastry <vipin.indiasmg@gmail.com>
(cherry picked from commit 006998e804)
This commit makes the playbook fetch the minimal current ceph
configuration and write it later on monitoring nodes so `cephadm` can
proceed with the adoption.
When a monitoring stack was deployed on a dedicated node, it means no
`ceph.conf` file was written, `cephadm` requires a `ceph.conf` in order
to adopt the daemon present on the node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1939887
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b445df0479)
Docs reflect that each instance of `rgw_instances`
can now take rgw_zonemaster, rgw_zonesecondary,
rgw_zonegroupmaster, rgw_multisite_proto.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
(cherry picked from commit a59bc2da3b)
This is never called in the playbook and seems unmaintained.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b01f16e835)
This converts some missed calls to `ansible_*` that were missed in
initial PR #6312
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 0163ecc924)
when the group `_filtered_clients` is built, the order can change from
the original `clients` group which can cause issues since we run
`ceph-container-engine` on the first client only. It means later in the
playbook we can make call to the container CLI on a node where the
container engine wasn't installed.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit a112572734)
As a continuation of a7f2fa73e6, this
change switches fact injection to off by default in the provided
ansible.cfg.
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit db031a4993)
(cherry picked from commit 5fa4ff5ed3)
It has come to our attention that using ansible_* vars that are
populated with INJECT_FACTS_AS_VARS=True is not very performant. In
order to be able to support setting that to off, we need to update the
references to use ansible_facts[<thing>] instead of ansible_<thing>.
Related: ansible#73654
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1935406
Signed-off-by: Alex Schultz <aschultz@redhat.com>
(cherry picked from commit a7f2fa73e6)
for some reason, `quay.io/app-sre/grafana` no longer exist.
as a workaround, all dashboard related images have been mirrored on
quay.ceph.io.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit c90b0985e5)
due to recent changes in shaman, we must fetch the right repo by
filtering on the desired architecture.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 5801171b37)
The data structure seems to have been modified in ceph@master (quincy).
This commit update the test accordingly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b8080bac41)
the data structure seems to have been modified in ceph@master (quincy).
This commit update the test accordingly.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 7e1db0b599)
This function makes the `ceph_volume` module be not idempotent in
containerized context because it tries to run a container and bindmount
directories that no longer exist.
In that case, the `lvs` command being executed returns something
different than `0` so we can't call `json.loads(out)['report'][0]['lv']`
since it might throw an python error.
The idea is to return `True` only if `rc` is equal to `0` and
`len(result)` is greater than `0`, which means the command matched an
LV.
Fixes: #6284
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit ed79bc7a4e)
`command -v` is a bash script which needs a shell to run.
Fixes: #6325
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 14c472707c)
This commit makes the playbook fetch the minimal current ceph
configuration and write it later on monitoring nodes so `cephadm` can
proceed with the adoption.
When a monitoring stack was deployed on a dedicated node, it means no
`ceph.conf` file was written, `cephadm` requires a `ceph.conf` in order
to adopt the daemon present on the node.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1939887
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit b445df0479)
Since we use the rerun plugin in tox, we shouldn't need to add these
`sleep` commands.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit e835c77a0e)
When collocating OSDs with other daemon, `num_osds` is incorrectly calculated
because `ceph-config` is called multiple times.
Indeed, the following code:
```
num_osds: "{{ lvm_list.stdout | default('{}') | from_json | length | int + num_osds | default(0) | int }}"
```
makes `num_osds` be incremented each time `ceph-config` is called.
We have to reset it in order to get the correct number of expected OSDs.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 31a0f2653d)
There are times where being able to skip OSD creation is useful to the
admin (see #1777 for example), and skipping the prepare_osd tag is a
way to achieve this. Document this fact.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit e66b7b7449)
Sometimes it's useful to be able to skip the OSD creation step when
running ceph-ansible (cf #1777). The lvm scenario has a prepare_osd
tag on the relevant play. This commit adds the same tag to the
lvm-batch scenario.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 88d119e95a)
In order to avoid false positive in the CI that I've been unable to
reproduce.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f7fd1c2298)
the `ceph_cmd` fact is missing the `--net=host` parameter.
Some tasks consuming this fact can fail like following:
```
Error: error configuring network namespace for container b8ec913db1fb694ae683faf202680de7a59c714a004e533aba87e8503d29261f: Missing CNI default network
```
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1931365
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit f143b1a647)
While working on the previous PR, I found a couple of typos in the
docs. This fixes those.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 8b1474ab75)
Due to recent changes in shaman, there's a chance it returns the wrong
repository from architecture point of view.
We can query shaman and ask for the correct architecture to get around
this.
Signed-off-by: Guillaume Abrioux <gabrioux@redhat.com>
(cherry picked from commit 39649f0ce8)
The "update apt cache" in the ceph-handler role was never called and the
handler trigger after adding the uca repository doesn't exist at all.
Instead of using a handler for that we can just set the update_cache
parameter to true like the other apt_repository tasks.
Resolve merge conflict from cherry-picking this commit.
Signed-off-by: Dimitri Savineau <dsavinea@redhat.com>
http://docs.ceph.com/docs/nautilus/radosgw/frontends/ 404s so replace
it with a working "latest" docs link, and correct the spelling of
"additional" while I'm at it.
Signed-off-by: Matthew Vernon <mv3@sanger.ac.uk>
(cherry picked from commit 847611048e)
Guillaume Abrioux
Seena Fallah
Benoît Knecht
Francesco Pantano
kalebskeithley
Dimitri Savineau
VasishtaShastry
Ali Maredia
Ken Dreyer
Alex Schultz
Matthew Vernon