-Adds patterns for propagating shapes through AtenWhereSelf and
AtenEqTensor
-Adds fold pattern for a rank0 squeezeDim of a full op
-Adds support for getting a list from a splat ValueTensorLiteralOp for
materializing scalar comparisons in where.self and eq.tensor
With a bit of hammering, these changes should unblock several IREE
inference failures.
This patch adds two things:
1. support for folding scalar patterns like [1]---squeeze--->[]
---unsqueeze--->[1].
2. a canonicalizer for aten.view that applies when we can statically or
dynamically (through the scalarized view shapes) infer that it is a
flatten or unflatten op in the last dim.
I'm not sure if this is the right place to be adding such a view
canonicalizer. Catastrophically, there is a decomposition from flatten
and unflatten into aten.view. Until this gets deleted (and it definitely
should be deleted), I felt like this would be an appropriate temporary
home. We run scalarize shapes after lowering to the backend contract
(i.e., decomposing), and scalarize shapes is required to be able to
infer dynamic dims coming from size int ops.
- Support Bidirectional LSTM (utilising the forward LSTM layer with
flipped Inputs and Outputs)
- Support layout 1
- Support default cases for attr `clip` and `input_forget`
- Support returning partial outputs (1-3)
- fixes for alt_e2e_tests lstm tests (1,2,3)
- Add Torch to TOSA lowering for aten.fill.Scalar/Tensor, aten.flip, and
aten.round
- Fix torchScalarToTosaTensor function to correctly convert Torch scalar
input to TOSA tensor
- Update xfail_sets.py with new e2e results
- Update basic.mlir with LIT tests for new ops
Change-Id: If1e42c2e582710dd8ad0465eed29806fbcdbde41
Signed-off-by: Justin Ngo <justin.ngo@arm.com>
- Add Torch to TOSA legalization for aten.index_select
- Fix createOneDimTfIndices function in TosaLegalizeCommon.cpp to
correctly convert Torch indices to TF-style indices, which is used in
convertGatherNdOp
- Update e2e tests in xfail_sets.py
- Update basic.mlir with new LIT test for aten.index_select
Signed-off-by: Justin Ngo <justin.ngo@arm.com>
Change-Id: I52519246183949353a3cf22f0a685fe3df8ec8ff
Signed-off-by: Justin Ngo <justin.ngo@arm.com>
Addresses ~200 onnx model compile failures in
<https://github.com/nod-ai/SHARK-TestSuite> related to
<https://github.com/iree-org/iree/issues/18631>.
This change simplifies the result of the generated broadcast op
substantially, but reduces the case coverage slightly.
The case which will become unsupported:
- trying to actually broadcast a dynamic dim that is secretly 1.
When does this case appear in practical scenarios?
- for a model where onnx shape inference cannot figure out that a dim
should be 1.
Why do I think we should not support this case for now?
1. For all models with dynamic dim expand ops, the previous path
uniformly generates uglier linalg IR (making it harder for IREE to fuse
properly with other ops).
2. For models failing shape inference castastrophically enough to fail
to see a dim is statically 1, we can try to apply constant folding in
the onnx model before importing.
Leaving this as a draft PR, since it may be more appropriate to fix the
compilation failure in IREE rather than torch-mlir.
### Example of broadcast required in previous path:
```mlir
%300 = linalg.generic {indexing_maps = [#map11], iterator_types = ["parallel", "parallel", "parallel", "parallel"]} outs(%299 : tensor<?x12x?x?xi1>) {
^bb0(%out: i1):
%306 = linalg.index 0 : index
%307 = linalg.index 3 : index
%308 = arith.index_cast %285 : i64 to index
%309 = arith.cmpi eq, %308, %c1 : index
%310 = arith.select %309, %c0, %306 : index
%311 = arith.index_cast %286 : i64 to index
%312 = arith.cmpi eq, %311, %c1 : index
%313 = arith.select %312, %c0, %307 : index
%extracted_79 = tensor.extract %reshape_78[%310, %c0, %c0, %313] : tensor<?x1x1x?xi1>
linalg.yield %extracted_79 : i1
} -> tensor<?x12x?x?xi1>
```
### Example of broadcast with simplified shape list:
```mlir
%409 = linalg.generic {indexing_maps = [#map15, #map11], iterator_types = ["parallel", "parallel", "parallel", "parallel"]} ins(%reshape_135 : tensor<?x1x1x?xi1>) outs(%408 : tensor<?x12x?x?xi1>) {
^bb0(%in: i1, %out: i1):
linalg.yield %in : i1
} -> tensor<?x12x?x?xi1>
```
The op can be valid with no attached shape symbols if they are not
required by the corresponding affine map. Fix the verifier to consider
number of arguments for both.
- Add lowering from Torch to TOSA for aten.diagonal
- Clean up some code
- Update xfail_sets.py with the new e2e results
- Update basic_mlir with the new op mlir test
Signed-off-by: Justin Ngo <justin.ngo@arm.com>
Change-Id: I99bed685455752d09ed96edd837c4dfbee152701
Signed-off-by: Justin Ngo <justin.ngo@arm.com>
- When the signal tensor is real, onnx allows its shape to be
`[batch][length]` as well as `[batch][length][1]`.
- Onnx also allows to specify `frame_length` together with `window` (not
empty), given that it matches the window size.
- Adding checks on signal and result shapes.
Previously, if the value was absent, this conversion was creating a
dense resource of value 0 with shape equal to the result shape, then
later re-extracting a splat value. This only works if the shape is
statically known, and even when the shape is known, this is completely
unnecessary since the value's shape should be `[1]` and not the result
shape.
This patch simply sets the `splatvalue` to a `torch.constant.float 0.0`
when the onnx op's `value` attr is absent, and adds `nullptr` checks to
the subsequent conditionals to avoid them in the case where an `attr` is
not given.
Addresses <https://github.com/nod-ai/SHARK-Turbine/issues/831>.
- Add Torch to TOSA legalization for the following reduction ops:
+ aten.min.dim
+ aten.min
+ aten.max
+ aten.prod
+ aten.prod.dim_int
+ aten.all.dim
- Add dtype casting support for reduce sum and prod ops
- Extend aten.max.dim legalization to a template to support aten.min.dim
legalization
- Update end-to-end tests sets in xfail_sets.py
Signed-off-by: Justin Ngo <justin.ngo@arm.com>
Change-Id: I854dd6c0c55e570c1fb7242f20c85cf64d6e7fe0
Signed-off-by: Justin Ngo <justin.ngo@arm.com>
Bump forward and refactor inline global slots to no longer track via
symlinks. This appears to make the tests past until we manage to remove
torchscript work.
As titled, create a new decomposition for `aten.fmod.Tensor` to
`aten.div`, `aten.trunc`, `aten.mul` and `aten.sub`. Note that we only
use `aten.trunc` for floating point operations. This further gets
decomposed to `aten.where` etc. by other existing decompositions.
This decomposition now makes TOSA pass for a simple model with
`aten.fmod` while it makes `stablehlo` fail. For now, we disallow this
decomposition for `stablehlo`
---------
Co-authored-by: Srinath Avadhanula <srinath.avadhanula@getcruise.com>
The lowering pattern for `aten.T` uses transposition implemented via
`linalg.generic`. For downstream passes it is advantageous to use named
ops wherever possible, so this patch changes the lowering to use
`linalg.transpose` instead.
This PR add `floordiv` to the `PY_BUILTIN_TO_TORCH_OP`. For
`aten.mul.int` and `aten.floordiv.int` ops, we add new Canonicalization
Patterns as follow:
```
%1 = torch.aten.mul.int %input, %const-5
%2 = torch.aten.mul.int %1, %const-6
```
Will be replaced by
`torch.aten.mul.int %input, %const-30`
And
```
%1 = torch.aten.mul.int %input, %const-5
%2 = torch.aten.floordiv.int %1, %const-5
```
Will directly return `%input`
This PR also relaxes the `float` type constraint in TorchToTosa for the
`AtenRsubScalarOp` conversion.
To test:
`cmake --build build --target check-torch-mlir-all`
This patch add a test for 638ef14, which use `linalg.broadcast` instead
of `generic` for convolution bias.
Co-authored-by: Rongsheng Gao <gaorongsheng@huawei.com>
Supports the result with dynamic shape and scalar indices like
```
func.func @test_gather_scalar(%arg0: !torch.vtensor<[3,4,5],f32>, %arg1: !torch.vtensor<[], si64>) -> !torch.vtensor<[?,?],f32> attributes {torch.onnx_meta.opset_version = 13 : si64} {
%0 = torch.operator "onnx.Gather"(%arg0, %arg1) {torch.onnx.axis = 0 : si64} : (!torch.vtensor<[3,4,5],f32>, !torch.vtensor<[], si64>) -> !torch.vtensor<[?,?],f32>
return %0 : !torch.vtensor<[?,?],f32>
}
```
`Torch::AtenSqueezeOp` is referring to the result shape, so it will
failed on lowering if the result shape is dynamic.
New sympy type is introduced to represent integer infinity in upstream
PyTorch repo. Subsequently, sympy.oo is no longer used to represent
infinity upper bound for dynamic dimensions where the upper bound is
unknown. Instead `int_oo` is used to represent integer infinity. This
commit updates the `_sympy_int_to_int` utility in light of this change.
The `axis` attribute is optionally available. Added support by computing
the pad based on the axis values.
---------
Signed-off-by: Rob Suderman <rob.suderman@gmail.com>
- This PR adds new (and equivalent) more tensorized impl of
MelWeightMatrix which lowers all the way to linalg.
- [Ref Pytorch
Impl](https://gist.github.com/PhaneeshB/4e6dfcded3007b1b686fbe28f07a67cd)
- Thanks to @rsuderman for pointing out the difficulties [earlier
impl](#3503) posed during lowering to linalg and also for providing a
better numpy impl 🙏
This commit adds the shape info for the tensors created during the
decomposition of GroupNorm op.
Signed-Off By: Vivek Khandelwal <vivekkhandelwal1424@gmail.com>
Now that the PyDev feature request pytorch/pytorch#117188 has been
completed, we can remove all the ad-hoc code that propagates sparsity
metadata and replace it with the built-int PyDev metadata for sparse
tensors. This removes a lot of code and also ensures sparsity is
consistent with the torch.sparse package for all cases.
Set PyTorch and TorchVision version to nightly release 2024-08-18.
This commit also updates the `scaled_dot_product_attention` op.
A new attribute `enable_gqa` has been added. As of now, only the
default value for the same is supported.
Signed-Off By: Vivek Khandelwal <vivekkhandelwal1424@gmail.com>
This commit extends the OnnxToTorch lowering for BatchNormalization op
for supporting the case when training=True.
Signed-Off By: Vivek Khandelwal <vivekkhandelwal1424@gmail.com>
This adds the `generate-runtime-verification` pass into the linalg
refbackend, and moves all tests that now abort at runtime into the crash
set, sorted by their respective errors.
I have fixed on set of errors found that way, which are mismatches
between the static dimensions we cast to and the actual dynamic
dimensions. This was caused by wrong annotations on the test cases, like
in
https://github.com/llvm/torch-mlir/pull/3615/files#diff-48bfbf41fcad5fa01b49197d251114f84a2b8de4f1d87ab938a061aedd1419b1R1931
This patch adds basic support for lowering graphs with per-channel
quantization. Per-channel quantized ops have to be excluded from
`FuseQuantizedOps` for now but can be used in QDQ quantized form.
Using this patch, we're able to import and execute (on the linalg
backend) graphs with per-channel quantization applied using the "new"
PyTorch 2.0 Export Quantization.
The saga of aligning onnx and torch padding conventions continues.
```python
onnx_pads = [low_x, low_y, low_z, high_x, high_y, high_z]
torch_pads = [low_z, high_z, low_y, high_y, low_x, high_x]
```
So not only is the lexicographical ordering hierarchy swapped (low/high
x spatial-dim -> spatial-dim x low/high) but the ordering in the the
spatial-dim specification is also reversed.
This patch properly reverses the pad ordering (and actually uses the
`shuffledPadding` to pad).
zjgarvey
Phaneesh Barwaria
jinchen
Justin Ngo
Chi_Liu
Rob Suderman
Prathamesh Tagore
giacs-epic
Srinath Avadhanula
Felix Schneider
Ze Zhang
Longsheng Mou
Muhammad Abubakar
Vimal
Vivek Khandelwal
Ian Wood
Aart Bik
aldesilv
Matthias Gehre