This commit adds the invariant to the op `torch.overwrite.tensor.contents` that
both of its operands have the same shape and size. In order to
maintain the invariant, special handling of this op is added to the
`RefineTypes` pass.
This commit adds handling to the `maximize-value-semantics` pass for
the case where a view-like op depends on a tensor that has been
overwritten by a value tensor. The approach for removing the
dependency is to change the input to the view-like op to be a copy of
the value tensor that is being used to overwrite.
This commit also removes `AtenFill_ScalarOp` and
`AtenBernoulli_FloatOp` from the list of view-like ops, since these
ops now have a corresponding op with value semantics into which they
get converted in the `reduce-op-variants` pass.
- This commit decomposes the `aten.batch_norm` op into the
`aten.native_batch_norm` op, instead of lowering it to the
`linalg.generic` op.
- It also adds run-time asserts in the `aten.native_batch_norm` lowering
to make sure that the shape of the weight, bias, running_mean, and
running_var must match the num of features.
- Since the `aten.native_batch_norm` op is not supported at TOSA backend,
all the modules that are dependent on the `aten.native_batch_norm` op
will fail and therefore they should be removed from the TOSA `passing`
set.
- It also moves `checkNotNone` to utility.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
This is intended to explore support for non-structured ops that can't
be modeled by Linalg dialect. `tm_tensor.scan` and `tm_tensor.scatter`
are added as the first such ops. The dialect should aim to be
upstreamed in the future.
This commit adds the op `PseudoAtenFillScalarOp` that represents
`AtenFill_ScalarOp` without the underscore. The approach is the same
as in commit dd998fa4d4.
Adding this op allows for a simpler and more consistent version of the
`empty` and `empty_like` op e2e tests.
- This commit adds lowering of `aten.le.Scalar` and `aten.ge.Scalar` ops
as a part of `convert-torch-to-linalg` pass.
- It also creates a new test script `elementwise_comparison.py` for all
element-wise comparison ops.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
This commit adds the op `PseudoAtenBernoulliFloatOp` that represents
`AtenBernoulli_FloatOp` without the underscore. This is needed to make
sure that the `ReduceOpVariants` pass turns the in-place op into an op
that takes value tensors as inputs, otherwise the
`MaximizeValueSemantics` pass will not be able to add value semantics
correctly.
- This commit adds lowering of `aten.eq.int` op as a part of
`convert-torch-to-std` pass.
- It also refactors the code for binary comparison ops lowering.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
- This commit adds lowering of `aten.Bool.Tensor` and
`aten.Float.Tensor` op as a part of `convert-torch-to-linalg` pass.
- It also adds support for returning bool types.
- It also fixes lowering of the `aten.Int.Tensor` op for non-zero rank
input tensors.
- If a scalar number is converted to a 0-d tensor and passed on to the
`aten.Float.Tensor` op, it folds to the scalar number.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
Some of the lowerings use the result type obtained from the op itself
to tell the `linalg::GenericOp` what the type of the result should be
rather than using the type of the result tensor given to the
`linalg::GenericOp`. This becomes a problem when the result type of
the op has static size information and the result tensor used in
`linalg::GenericOp` has dynamic dimensions, for `linalg::GenericOp`
expects the result type to be equal to the type of the output tensor.
This commit replaces the use of the result type from the op itself
with the type of the result tensor passed to `linalg::GenericOp`.
In order to not create too many dynamic/static versions of the same
e2e test, e2e tests have only been added to the ops that currently
fail when used with static sizes.
* [tosa] Support for AtenNe[Tensor|Scalar]Op, AtenLog2Op,
AtenBitwiseAndTensorOp, AtenSquareOp and AtenThresholdOp
* Fix for Issue #532 - Mixed input types for few ops and updated few
tests to use i32 instead of i64
Signed-off-by: Anup Gangwar <anup.gangwar@arm.com>
Co-authored-by: Anup Gangwar <anup.gangwar@arm.com>
This commit fixes an error in the refine types pass of constant
allocation ops. The function used to set the dtype,
`fillInDtypeGivenDtypeAndDataType`, takes two torch types as arguments,
but a torch type and a standard MLIR type were being passed into it.
This commit also fixes the way the dtype was calculated in
`visitAtenToDtypeOp`. This op was also passing a standard MLIR type as
an argument to the `fillInDtypeGivenDtypeAndDataType`
function. Moreover, since the op `aten.to.dtype` has the dtype
argument as not optional, all that is needed is to match
against the int value to extract the dtype.
- This commit adds `aten.assert` op in the Torch dialect.
- The `aten.assert` op is lowered to `mlir::Assert` op.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
- This commit adds support for `aten.native_batch_norm` operation.
- The current implementation only supports inference mode of
`aten.native_batch_norm` op.
Signed-Off-By: Gaurav Shukla <gaurav@nod-labs.com>
The lowering of aten::nll_loss_backward op has been added
from torch to linalg dialect. The changes has been made as
a part of -torch-convert-to-linalg pass.
Signed-off-by: Prashant Kumar prashant@nod-labs.com
This PR include the following pieces:
- Add torch `Generator` type. `Generator` type is converted to i64 in
refbackend type converter.
- Add seed managment support for the default global generator.
`torch_c.getNextSeed` op is used to get the seed. On refbackend, the
`torch_c.getNextSeed` is lowered to load/store from [0] of global
variable `default_generator` memref<i64> in `InsertRngGlobals` pass.
- Add `aten.uniform_` and testing as an example op for RNG ops. Add
`torch.pseudo.aten.uniform` op. It has the same operands and return as
the `aten.uniform_` from the op registry except for value semantics.
The added e2e maxpool testcase from #545 was not getting a static shape
due to an unfolded prim.If when RefineTypes was called. This was because
of unfolded torch.iaten.__is__ and torch.prim.unchecked_cast operators
with torch.derefine operands.
* [tosa] Support for AtenCeilOp and AtenReciprocalOp
* [tosa] Support for comparator ops, Aten[Gt|Lt|Eq][Tensor|Scalar]Op with scalar constant
* [tosa] Support for Scalar variants of Aten[Mul|Div|Add|Sub] Ops with scalar constants
Signed-off-by: Anup Gangwar <anup.gangwar@arm.com>
Co-authored-by: Anup Gangwar <anup.gangwar@arm.com>
- Common code as TF repository, being moved to MLIR core.
- Will support further legalizations to be published.
Signed-off-by: Suraj Sudhir <suraj.sudhir@arm.com>
Note that to enable folding of the code coming from an example
like the ConstantPad2dStaticModule e2e test, support for other
operations had to be added/improved:
- aten::neg.int
- aten::eq.float
- aten::eq.str
- prim::Uninitialized
This commit adds lowering of `aten.threshold` op
This commit adds lowering of `aten.threshold_backward` op
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
This involes the following 2 parts:
- Change refine type to propagate more static shape info.
- Get as much static shape info as possible when creating the result
tensor when converting to linalg.
- This commit adds E2E support for `aten.ones_like` and
`aten.zeros_like` ops.
- Adds support for non-None `dtype` argument of `aten.empty_like` op.
- All the unit test cases related to constant tensor allocation like ops
are moved to a different file named `constant_alloc.py`.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
This commit adds lowering of `aten.arange.start_step` op.
This commit decomposes `aten.arange` and `aten.arange.start` into
`aten.arange.start_step` op.
Signed-Off By: Vivek Khandelwal <vivek@nod-labs.com>
- It folds `aten.to.dtype` when the input tensor type and result type
are exactly same.
- It folds `aten.view` when the rank of both the input tensor type and
result type is unity.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
We only handle the expanding OR collapsing cases, we do not handle
expanding And collapsing happening at the same time or cases where
it's neither collapsing nor expanding like view of [2,3] for
3x2 tensor.
It's assumed that if a shape list element is got from
`aten.size(tensor, dim)` the corresponding dim is not splitted or
collapsed. This assumption makes it easier to deal with dynamic shapes.
- Added E2E support for `aten.eq.Tensor` and `aten.lt.Tensor` ops. Both
the operands are expected to be of the same type, i.e., type promotion
is not addressed as a part of this commit.
- Added E2E support for `aten.eq.Scalar` and `aten.lt.Scalar` ops.
Tensor operand type to Scalar operand type promotion has not been
handled in this commit.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
The existing implementation of `ConvertConstantTensorAllocOp<>` requires
a C++17 feature `if constexpr ()`. This commit removes the use of that
feature to support the implementation even for lower C++ versions.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
Add the required lowerings and correct test cases.
These op produce zero-d tensors and it was incorrectly mentioned in
refine types to produce 1d tensor of size 1.
- Templatize `aten.zeros` and `aten.ones` ops lowering.
- Add E2E support for `aten.empty` op.
- Add Integer type support in `aten.mul.Scalar` op lowering.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
`aten.gt.Tensor` op has been added in torch dialect and the
lowering of the op has been done to the linalg dialect.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
This commit adds support for aten.native_layer_norm operation. Here
the previous code for aten.layer_norm is tweaked a little bit to
accomodate both mean and variance values alongwith the layer norm
value. This commit also adds decomposition of aten.layer_norm into
aten.native_layer_norm, which was previously getting lowered directly
to linalg.
Signed-Off-By: Prateek Gupta<prateek@nod-labs.com>
This commit adds lowering of `aten.squeeze.dim` op into
`linalg.TensorCollapseShape` op. Here, the dim(th) dimension of the
input tensor is not supposed to be dynamic.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
This commit adds lowering of `aten.gt.Scalar` and `aten.where.self` as a
part of element-wise ops lowering.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
Support for passing memref of bool types as a function argument
and return is added in ref-backend.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
The op lowering has been added as a part of `torch-lower-to-linalg`
pass. This takes care of ignore_index but the weight and reduction
operand is still to be accounted for.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
- Supports variants with multiple dims, one dim, all dime
- Leverages legalize_common and legalize_utils code from
TensorFlow-TOSA work
Signed-off-by: Suraj Sudhir <suraj.sudhir@arm.com>
There is an op name change that requires trivial changes.
Also, some of the warning has been fixed.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
Many reduction ops take as an argument an optional output dtype that
can change the type of the input tensor before the reduction is
performed. This commit adds support for the optional dtype flag that
had been previously ignored.
Test:
/tools/torchscript_e2e_test.sh -f 'ReduceSumDtype'
/tools/torchscript_e2e_test.sh -f 'ReduceSumDImIntListDtype'
This commit adds lowering of `aten.Squeeze` op into
`linalg.TensorCollapseShape` op. The size 1 dynamic dimensions are not
handled as a part of this commit.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
This is to fold the common pattern from Bert inference like:
```
%111 = torch.prim.NumToTensor.Scalar %110 : !torch.int ->
!torch.vtensor<[],si64>
%112 = torch.aten.Int.Tensor %111 : !torch.vtensor<[],si64> ->
!torch.int
```
The lowering of aten.fill.Scalar has been added.
The changes have been made as a part of -torch-convert-to-linalg pass.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
This commit fixes a type promotion bug when NumToTensor was given a
float as an argument. In particular, the rules for type promotion of a
scalar vary depending on if the scalar is part of a tensor op or
not. NumToTensor falls under the second category, but it was being
treated as part of the first category.
aten.log_softmax_back_data op lowering and required
tests has been added. Some NFC have also been added.
Signed-off-by: Prashant Kumar prashant@nod-labs.com
This commit adds lowering of `aten.mul.Scalar` and also adds
decomposition of `aten.addmm` to `aten.mul.Scalar`, `aten.add.Tensor`
and `aten.mm` ops.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
Now, aten::linear supports rank 3 inputs. This is a fix
for upcoming bert-inference task. The correct way should be
to support broadcasting in `aten.matmul` op and decompose
`aten.linear` into right ops.
This commit adds new operation `aten.gelu_backward` in the aten
dialect and adds lowering of this operation from aten to linalg.
Signed-Off-By: Prateek Gupta <prateek@nod-labs.com>
This change is to unblock the work of some backprop ops returning more
than one tensors. We will need to think of a more scalable approach
in the future if more flexible return types combinations are needed.
- Remove use of conversion construction macros
- Add mul and div op conversions
- Add corresponding tests
Signed-off-by: Suraj Sudhir <suraj.sudhir@arm.com>
This is to facilitate scalar type conversion in the TorchToLinalg. As
part of adding the helper, this PR also:
- Updated `AtenAddTensorOp`, `AtenSubTensorOp` to use the helpers to
support more type variants.
- Added e2e type promotion testing.
- Added i32 memref return/arg type to support e2e testing.
Support for returning elemental types. Previously, only
memref types as returning types was supported. All the hacky ways
to write tests which return elemental types should be taken care of.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
The lowering of `aten.Int.Tensor` op has been added.
The changes has been made as a part of `convert-torch-to-linalg` pass.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
- This commit adds lowering of `aten.View` to `linalg.TensorExpandShape`.
- This lowering will be successful only when one or more static
dimensions are expanded.
- It also fixes a typo in `ConvertAtenFlattenUsingIntsOp` conversion
pattern.
Signed-Off-by: Gaurav Shukla <gaurav@nod-labs.com>
The types have different levels of categories: where
complex > floating > integral > boolean (> means left hand
side has higher category).
The operands have different levels of priorities where:
dimensioned tensor > 0-dim tensor > scalar == wrapped 0-dim tensor.
This is represented by the `ResultTypeState.dimResult`,
`ResultTypeState.zeroResult` and `ResultTypeState..wrappedResult` in
the source code.
For operands of the same priorities, the result type should be the
highest categories with sufficient width to hold all operands.
By default, only the highest priority operands participate in the type
promotion logic. Lower priority operands participate if they are in
a higher category than any higher priority operands.
For example, <[],f32> (lower priority) and <[1], si64> tensor would
result in <[?],f32> tensor because floating > integeral. Another example
<[],f64> (lower priority) and <[1], f32> tensor would result in
<[?], f32> tensor because f32 and f64 are the same category.
The ScalarType enum definition, type promotion table, ResultTypeState
struct definition and some helpers are copied from
aten/src/ATen/native/TypeProperties.*
Other references:
- https://pytorch.org/docs/stable/tensor_attributes.html#type-promotion-doc
- https://github.com/pytorch/pytorch/issues/9515
Other minor changes:
1. Fix `visitExpandLikeOp` to consider cases where the given sizes list
size is larger than the input rank.
2. Add back the somehow deleted `torch.aten.softmax.int` tests in
decompose-complex-ops.mlir.
Part of #380
Also
- BoolType is not considered as Scalar
- e2e framework fixes for nan handling
- `tu.rand(..., low=, high=)` support
- delete unused variable (fix warning)
- Add IouOfModule from #380 to e2e test suite (this is a common
calculation in vision models)
Your branch is ahead of 'origin/main' by 1 commit.
Lowering of `aten.matmul` op is added from torch to linalg dialect.
The different cases correspond to
https://pytorch.org/docs/stable/generated/torch.matmul.html.
TODO: Broadcasting in case of batch-matmul is yet to be taken care of.
Signed-off-by: Prashant Kumar <prashant@nod-labs.com>
* Print more exception info on error during test execution
* Fix formatting
* Add aten::gelu lowering
Co-authored-by: Boian Petkantchin <boian@nod-labs.com>
Includes a fix to use `add_mlir_public_c_api_library` for Torch-MLIR's CAPI library, which is now required (note: upstream sample has it the right way).
Disabled a TOSA test per discussion: https://github.com/llvm/torch-mlir/issues/379
Summary:
This commit fixes an off-by-one error in how negative dimensiosn were
being handled in the lowering of transpose. This commit also adds
tests to transpose and unsqueeze to test negative dimensions.
Gaurav Shukla
Ramiro Leal-Cavazos
Prashant Kumar
Nirvedh
Anup Gangwar
Yi Zhang
Prateek Gupta
Anup Gangwar
Suraj Sudhir
Prashant Kumar
Liam Fitzpatrick
stephenneuendorffer
Vivek Khandelwal
dan
xndcn
Daniel Garvey
Suraj Sudhir
ds1231h
nodlabs
George Petterson
Wang Kangyu
Sean Silva
Boian Petkantchin
Stella Laurenzo