* not to decompose `aten.amax` on `stablehlo` backend. Because it could
be lowering to `stablehlo.reduce` directly.
* lowering `aten.max.dim` to `stablehlo.reduce apply max` when
`AtenMaxDimOp.getIndices()` doesn't have users. It's more simple.
In constant folding progress, a new constant op will be created
according to the origin op's result type.
See the code in TorchDialect.cpp.
```cpp
Operation *TorchDialect::materializeConstant(OpBuilder &builder,
Attribute value, Type type,
Location loc) {
if (auto integerType = dyn_cast<Torch::IntType>(type))
return builder.create<Torch::ConstantIntOp>(loc, cast<IntegerAttr>(value));
if (auto floatType = dyn_cast<Torch::FloatType>(type))
return builder.create<Torch::ConstantFloatOp>(loc, cast<FloatAttr>(value));
if (auto numberType = dyn_cast<Torch::NumberType>(type)) {
if (auto floatValue = dyn_cast<mlir::FloatAttr>(value)) {
return builder.create<Torch::ConstantNumberOp>(loc, floatValue);
} else if (auto intValue = dyn_cast<mlir::IntegerAttr>(value)) {
return builder.create<Torch::ConstantNumberOp>(loc, intValue);
}
}
if (isa<Torch::BoolType>(type)) {
return builder.create<Torch::ConstantBoolOp>(loc, cast<IntegerAttr>(value));
}
if (isa<Torch::NoneType>(type))
return builder.create<ConstantNoneOp>(loc);
if (auto stringAttr = dyn_cast<StringAttr>(value))
return builder.create<ConstantStrOp>(loc, stringAttr);
if (auto elementsAttr = dyn_cast<ElementsAttr>(value)) {
// Only !torch.vtensor can be constant folded. !torch.tensor has
// non-trivial aliasing semantics which prevent deduplicating it.
assert(isa<ValueTensorType>(type) && "should be a vtensor type!");
return builder.create<ValueTensorLiteralOp>(loc, elementsAttr);
}
return nullptr;
}
```
So when the op has a tensor result type, it must be "ValueTensorType"
due to the **assert** statement. However, many fold methods in
TorchOps.cpp only have a judgment of "BaseTensorType".
As mentioned in issue #3290 , the difference between onnx.Transpose in
versions 1 and 13 is minimal, and therefore should be supported with the
same conversion pattern.
After running the model tests in SHARK-TestSuite, I noticed a few model
failures due to half-fusion.
Notably, RDN_pytorch_vaiq_int8 had a depth=5 convolution chain with
multiple AtenViewOp's.
This change enables more customization with operand quantization, and
generalizes the patterns QuantizeOperands and QuantizeTransposeOperands
to QuantizeOperandsPastCommutingOps.
This allows for passing quantization through operations which are
functionally unaffected by quantization, such as view-like ops. The
purpose of this change is to address a myriad of quantization issues
seen in quantized onnx models that have some reshape-like operations
sandwiched in between a dequant and something like a matmul (whose other
operand is immediately quantizable).
* Enables assume_strict_symbolic_shapes on fx_importer imported
programs, indicating strict shape semantics.
* Reworks the view->reshape lowering to take advantage of strict mode
and do one of:
* Collapse to 0D
* Flatten/Unflatten when there is an inferred dim.
* Fallback to tensor.reshape
* Splits some test cases up and adds an attribute to control the old
pattern (so new corners can be tested in strict mode in isolation).
* Dynamic inferred mode needs upstream work to generalize expand_shape
(so that case is suppressed here).
* Deletes the assert from the existing tensor.reshape lowering if strict
shape mode is enabled (since the condition it is dynamically asserting
cannot happen).
This commit adds the OnnxToTorch support for ReduceSumSquare ops.
---------
Co-authored-by: Ubuntu <archana@archana-cpu.judsoscro3wupi0qm4bjlj5m3b.bx.internal.cloudapp.net>
While playing with TorchDynamo on ResNet18. I notice following issues:
- `prims.convert_element_type` can’t be canonicalized even if the input
and the output share the same type
- `aten.max_pool2d_with_indices` is always used instead of
`aten.max_pool2d`, even if the second returned output (indices) has no
user
This PR fixes above issues by adding a folder to the
PrimsConvertElementTypeOp and a canonicalizer to the
AtenMaxPool2dWithIndicesOp
Lit test:
`cmake --build build --target check-torch-mlir-all`
---------
Co-authored-by: Ze Zhang <ze.zhang@getcruise.com>
This is probably a decent PR for learning about blocks and regions.
If you're here to learn about that, consider also looking at
lib/Conversion/TorchToSCF/TorchToSCF.cpp
While this doesn't include an e2e test, it is tested downstream in
https://github.com/nod-ai/SHARK-TestSuite/blob/main/e2eshark/onnx/operators/If/model.py
---------
Co-authored-by: Xida Ren <xida.ren.dev@gmail.com>
I spent a little while debugging numerics issues with some tests similar
to the ones in quantized_models.py, only to find that pytorch's
quantized conv transpose is catastrophically inaccurate. I'll upstream
the issue and only leave the tests here which are of the form quantize
-> dequantize -> op.
This is part 1 of ~3, formatting all miscellaneous text files and CPP files matched by a first run of pre-commit. These tend to be low change-traffic and are likely not disruptive.
Subsequent patches will format Python files and remaining CPP files.
Gridsampler
In onnx the interpolation mode is called 'linear' whereas in pytorch it
is called 'bilinear'. This led to the problem that everything other than
'bilinear' was rejected. It needed to be changed to linear.
Sparse tensor conversions are represented by special aten operators.
This PR ensures the conversions are recognized (instead of failing the
full torch aten lowering to linalg).
- Fix pad size to data_rank for dynamic paddingSize Tensor.
- This fix is in accordance with [input
specification](https://onnx.ai/onnx/operators/onnx__Pad.html#inputs) for
onnx.Pad
- Impl will need to be updated for dynamic padSize when support for
`axes` is added.
A choice was made to quantize the return type of Relu with a scale and
zero point copied from the input's quantization scheme. With this
choice, the torch-to-linalg conversion of quantized Relu essentially
computes max(input, zeroPoint) in the elementwise payload.
All e2e iree tests compiled, but they have the run issue of mismatch of
dtype like the following
```
expected:
1x1x2x2xsi32=[[[12 16][24 28]]]
actual:
1x1x2x2xi32=[[[12 16][24 28]]]
```
* promote input to output element-type when lowering to stablehlo, so
that it could satisfy stablehlo's type constraints.
* split promote-to-fp unary ops from fp-only unary ops.
This commit also cleans up the OnnxToTorch lowering for the Squeeze and
Unsqueeze op and adds the support for handling edge cases.
Signed-Off By: Vivek Khandelwal <vivekkhandelwal1424@gmail.com>
Version number was set too high. Lowered to support more cases allows
more tests to pass.
Co-authored-by: Robert Suderman <rsuderman@Roberts-MacBook-Pro.local>
Previous implementation erroneously mixed up num_outputs with
slice_size. New version correctly computs the slice size and directly
performs slicing rather than leveraging `aten.split.tensor`. This is due
to `onnx` supporting a fixed number of splits making the size
computation more easily computeable when lowering to `aten` rather than
deferring to `aten.split.tensor`.
---------
Co-authored-by: Robert Suderman <rsuderman@Roberts-MacBook-Pro.local>
We can map to `tensor.reshape` for handling multiple output dynamic
shapes. Later we can perform a more complex analysis for indentifying
expand/collapse cases from the tensor.reshape.
Initially we planned to handle this identification at the `torch` level
however it will be easier to handle once converted to core
mlir-dialects.
Decomposition RepeatInterleaveSelfInt with following ops:
```python
def my_repeat_interleave(input, repeats, dim=None):
if dim is None:
# Flatten the input and then repeat
return input.flatten().unsqueeze(-1).tile((1, repeats)).flatten()
else:
# Calculate the shape after repeat
expanded_shape = list(input.shape)
expanded_shape[dim] *= repeats
# Repeat the tensor along the specified dimension
repeat_shape = [1] * (input.dim() + 1)
repeat_shape[dim + 1] = repeats
input = input.unsqueeze(-1)
# Tile and then reshape
tiled = torch.tile(input, repeat_shape)
# Rearrange and reshape
repeated = tiled.reshape(*expanded_shape)
return repeated
```
I passed the tests of stablehlo and linalg. When testing onnx, strange
things happened.
In torch-mlir's CI **torch_nightly** and my own
environment(torch==2.4.0.dev20240318+cpu), it can **pass the pass**.
In torch-mlir's CI **torch_stable**, it **failed**.
The test case is `RepeatInterleaveSelfIntNoDimModule_basic`, the result
shape should be [120].
```python
class RepeatInterleaveSelfIntNoDimModule(torch.nn.Module):
def __init__(self):
super().__init__()
@export
@annotate_args([
None,
([3, 4, 5], torch.float32, True),
])
def forward(self, x):
return x.repeat_interleave(2)
@register_test_case(module_factory=lambda: RepeatInterleaveSelfIntNoDimModule())
def RepeatInterleaveSelfIntNoDimModule_basic(module, tu: TestUtils):
module.forward(tu.rand(3, 4, 5))
```
The error log is as follows:
```
Unexpected outcome summary: (onnx)
****** Failed tests - 1 tests
FAIL - "RepeatInterleaveSelfIntNoDimModule_basic"
@ trace item #0 - call to "forward"
@ output of call to "forward"
ERROR: shape (torch.Size([6, 4, 5])) is not equal to golden shape (torch.Size([120]))
```
@rsuderman
Would you please help me check what's wrong with my PR? Thanks a lot.
Align corner modes which select what the corners mean.
Either the center of the corner points or the edges of the edge points.
---------
Co-authored-by: Rob Suderman <rob.suderman@gmail.com>
The new cases added for quantized matmuls are:
1. vec-vec
2. vec-mat
3. mat-vec
each of which are now lowered to expand(s), quantized_matmul, and
collapse.
1. onnx.MatMulInteger now converts to aten.matmul instead of aten.mm
2. aten.matmul, for ranks >=2, now allows quantized inputs and will
lower to linalg::quantized_matmul or linalg::quantized_batch_matmul.
3. added AtenMatmulOp to the FuseQuantizeOps rewrite patters
QuantizeOperands, QuantizeTransposedOperands, and QuantizeAccumulator
4. added several tests, including some to test AtenMmOp with varying
quantization signed-ness.
5. a quantized matmul mat-vec test is added to verify the failure to
lower to linalg; cleaned of out-of-date code related to common
torch-mlir lowering xfails.
6. in debugging a real model with quantized matmuls, I found a bug on
the scalarize-shapes pass which resulted from the aten.full op folder
returning an incompatible result type. This is fixed by the small change
here to
[lib/Dialect/Torch/IR/TorchOps.cpp](https://github.com/llvm/torch-mlir/compare/main...zjgarvey:torch-mlir:MatMulIntegerFix?expand=1#diff-dc8ed165c207918e606490eee3984b1ad51d7034e6aac36fc046bf47f6f03f4f).
- Added linalg lowering for `AtenFloorDivideScalarOp`
- Needed `AtenDivScalarModeOp` for the decomp.
- Added linalg lowering for `AtenDivScalarModeOp`
- Moved linalg payload logic to `createDivModePayload()` since the logic
was nearly identical for both `AtenDivScalarModeOp` and
`AtenDivTensorModeOp`. Just a template function
- Added `AtenDivScalarModeOp` lowering for stablehlo
Pytorch's
[`torch.floor_divide()`](https://pytorch.org/docs/stable/generated/torch.floor_divide.html)
in a previous version (for a reason unknown to me) preformed a
truncation instead of "floor". The already implemented op
`AtenFloorDivideTensorOp` was done before this change. However, this
wasn't caught because our testcases only tested positive floor division.
I changed this to floor as well as adding a few test cases.
If there is only a single value scattered there can be an implicit batch
dimension. This includes a check for the implicit batch dimension when
reshaping the update tensor. It includes an e2e test to verify
correctness.
Fix the case PrimListUnpackOp's result num is not equal to PrimList
length.
See the following example:
```python
def forward(self, x):
if len(x.shape) == 5:
b0, t, c0, h0, w0 = x.shape
b, c, h, w = torch.mul(b0, t), c0, h0, w0
else:
b1, c1, h1, w1 = x.shape
b, c, h, w = b1, c1, h1, w1
res = torch.reshape(x, [b, c, h, w])
return res
```
Without this fix, the following error message will occur：
```
/root/torch-mlir/externals/llvm-project/mlir/lib/IR/PatternMatch.cpp:118: virtual void mlir::RewriterBase::replaceOp(mlir::Operation *, mlir::ValueRange): Assertion `op->getNumResults() == newValues.size() && "incorrect # of replacement values"' failed.
```
Previously, it could only handle the situations where outputsize == (1,
1) or outputsize == (input_H, input_W). Now it supports all situations
where input_H % output_H== 0 && input_W % output_W == 0
1. Changes the linalg lowering for dequantization ops to always sign
cast to float to prevent misrepresenting uint32 overflow on subtraction
with zero point.
2. Adds a basic quantized model test which only quantizes and
dequantizes and now passes with these changes in linalg and onnx
configs.
3. Changes the aten.mm lowering to allow mismatched quantized types.
4. If a quantized matmul arg is uint8, we shift by 128 to faithfully
represent the quantization as a signed i8 quantization. This worked fine
in the AtenMmOp lowering, but I'd be happy to move it to a rewrite in
FuseQuantizedOps.cpp instead if that seems more appropriate.
With the changes 3 and 4, the QuantizedMLP_basic and
QuantizedSingleLayer_basic e2e tests now passes with the onnx config.
…ute_reshape_shape
as that `aten.view` support at most one `-1` in dim list. The original
calculation of `numel` is wrong when there is a `-1` in dim list.
This PR only performs a lit test. In lieu of an e2e test, https://github.com/nod-ai/SHARK-TestSuite/pull/142 makede sure that the lowering works & the numbers check out.
Co-authored-by: Xida Ren <xida.ren.dev@gmail.com>
* as that `TorchMLIRTorchConversionPasses` missing dependencies of
`TorchMLIRTorchToStablehlo` and `TorchMLIRTorchToTensor`.
* use `TorchMLIRConversionPasses` instead of scattered targets.
Squeezes can be ambiguous without the output shape information. For
instance (1, 1, 256) squeezed can be either (1, 256) or (256). We need
to check the resulting shape to know what the shape should look like.
Shapes can be processed as tensors to represent the set of dimensions.
As reshapes take a list of scalars this can result in a single dynamic
dimension blocking the adjacent static dimensions.
This pass attempts to de-couple tensor computations related to shapes
and propagate values to better support lowering scalar tensor
computations.
This commit also cleans up the OnnxToTorch lowering for the ReduceMean
op and adds the support for handling edge cases.
Signed-Off By: Vivek Khandelwal vivekkhandelwal1424@gmail.com
The `convertTensorToElementType` function expects it's argument to have
a valid tensor type that is not `Torch::NoneType`. This PR checks that
the bias tensor is not of type `Torch::NoneType` before calling
`convertTensorToElementType` on the bias tensor argument in the
`matchAndRewrite` member function of the `ConvertAtenConvolutionOp`
class.
See the related issues here:
[SHARK-Turbine#556](https://github.com/nod-ai/SHARK-Turbine/issues/556)
1. Adds uint8 casting to onnx.Cast op
2. Fixes an issue with onnx.DequantizeLinear when the scale comes with
shape [1].
3. Adds support for unsigned types in an AtenItemOp folder
4. Adds a simpler quantized model for easier debugging
5. Adds a fusion pass to convert [quant -> dequant -> transpose -> mm]
patterns to [transpose -> quant -> mm].
6. Moved some xfails that are still not passing, but for different
reasons than onnx.cast failures.
When lowering `torch.aten.convolution`, it is expected that the
'transposed' argument is a torch.constant operation. In some cases, the
argument was a `from_i1` operation converting an `arith.constant`
operation into a torch.bool. This is not wrong semantically, but instead
of generalizing the legality of the `torch.aten.convolution` op, we
canonicalize `arith.constant` ops followed by `from_i1` ops to
`torch.bool` ops.
For example:
```
//===-------------------------------------------===//
Legalizing operation : 'torch.aten.convolution'(0x124705b90) {
%33 = "torch.aten.convolution"(%arg0, %20, %21, %31, %29, %30, %19, %32, %0) : (!torch.vtensor<[1,1,28,28],f32>, !torch.vtensor<[10,1,5,5],f32>, !torch.vtensor<[10],f32>, !torch.list<int>, !torch.list<int>, !torch.list<int>, !torch.bool, !torch.list<int>, !torch.int) -> !torch.vtensor<[1,10,24,24],f32>
* Fold {
} -> FAILURE : unable to fold
* Pattern : 'torch.aten.convolution -> ()' {
** Failure : unimplemented: only constant transposed supported. <-- Resolved by this PR
} -> FAILURE : pattern failed to match
* Pattern : 'torch.aten.convolution -> ()' {
** Failure : not a supported Scalar to Tensor like op
} -> FAILURE : pattern failed to match
* Pattern : 'torch.aten.convolution -> ()' {
** Failure : not a supported elementwise op
} -> FAILURE : pattern failed to match
* Pattern : 'torch.aten.convolution -> ()' {
** Failure : not a supported reduce op
} -> FAILURE : pattern failed to match
} -> FAILURE : no matched legalization pattern
//===-------------------------------------------===//
<stdin>:21:11: error: failed to legalize operation 'torch.aten.convolution' that was explicitly marked illegal
%17 = torch.operator "onnx.Conv"(%arg0, %0, %1) {torch.onnx.dilations = [1 : si64, 1 : si64], torch.onnx.group = 1 : si64, torch.onnx.kernel_shape = [5 : si64, 5 : si64], torch.onnx.pads = [0 : si64, 0 : si64, 0 : si64, 0 : si64], torch.onnx.strides = [1 : si64, 1 : si64]} : (!torch.vtensor<[1,1,28,28],f32>, !torch.vtensor<[10,1,5,5],f32>, !torch.vtensor<[10],f32>) -> !torch.vtensor<[1,10,24,24],f32>
^
<stdin>:21:11: note: see current operation: %33 = "torch.aten.convolution"(%arg0, %20, %21, %31, %29, %30, %19, %32, %0) : (!torch.vtensor<[1,1,28,28],f32>, !torch.vtensor<[10,1,5,5],f32>, !torch.vtensor<[10],f32>, !torch.list<int>, !torch.list<int>, !torch.list<int>, !torch.bool, !torch.list<int>, !torch.int) -> !torch.vtensor<[1,10,24,24],f32>
```
Additionally, we require the canonicalization of `to_i1` operating on a
torch.constant bool to an `arith.constant ... : i1` for the e2e tests to
pass successfully.
Now there no lowing for `aten.Int.bool` in `convert-torch-to-arith`
pass. this PR add this support.
Below is the UT.
```
func.func @torch.aten.Int.bool(%arg0: !torch.bool) -> !torch.int {
%0 = torch.aten.Int.bool %arg0 : !torch.bool -> !torch.int
return %0 : !torch.int
}
```
Fix bug of DecomposeAtenSelectIntOp. Because it may use resultTy when
resultTy has not been inferred.
```
auto resultTy = op.getType().cast<BaseTensorType>();
if (sliceTy.getSizes().size() == resultTy.getSizes().size()) {
rewriter.replaceOp(op, slice);
return success();
}
```
So I add restriction.
Two e2e tests (AdaptiveAveragePool1/2dUnitOutputSizeDynamic) were
failing due to numerics. This was as a result of passing -1 as the
kernel size in the lowering for the corresponding onnx op
GlobalAveragePool.
Reshaping tensors depend on directly matching individual dimensions to
their corresponding dim in the `torch.view` reshape dimensions. This
involves decoupling dynamic dimensions from their static counterparts
and support cleanup / canonicalization.
This commit adds the OnnxToTorch lowering for the Mish, Softplus,
HardSwish, Trilu, ThresholdedRelu op
Signed-Off By: Vivek Khandelwal <vivekkhandelwal1424@gmail.com>
The previous conversions for AtenAdaptiveAvgPool1dOp and
AtenAdaptiveMaxPool2dOp are refactored into a general templated
conversion that works for all of the AtenAdaptive...PoolNdOp's.
New support is added for the following ops:
1. AtenAdaptiveMaxPool1d
2. AtenAdaptiveMaxPool3d
3. AtenAdaptiveAvgPool3d
Support is also provided for passing inputs without batch dimensions.
For example, applying adaptive_avg_pool2d to an input tensor of rank 3.
After [pytorch #118162](https://github.com/pytorch/pytorch/pull/118162)
gets down to torch-mlir, I'll add a test for AdaptiveMaxPool1d with
return_indices (which will pass with that upstream fix).
---------
Co-authored-by: James Newling <james.newling@gmail.com>
This adds support for converting DynamicQuantizeLinear from torch-onnx
to torch.
I could not get an e2e test to pass, since there seems to be some issues
with uint8 casting somewhere lower in the pipeline. For example
compiling with IREE for llvm-cpu, I would get either the correct zero
point (if zp < 128) or the correct zero-point minus 256 (if zp >= 128).
The output tensor seems to always return a tensor of zeros, which also
occurs when running uint8 examples through QuantizeLinear.
Edit: the first problem can be resolved by casting the output back to
uint8 on output, the second problem is resolved with PR #3018
Added support for dynamic shapes in `flattenusingints` op in tosa
dialect. Due to this some Argmax tests pass
This PR fixes this issue https://github.com/llvm/torch-mlir/issues/3004
The following tests pass after this PR
```
1. "ArgmaxIntModule_basic"
2. "ArgmaxIntModule_multiple_maxs"
3. "ArgmaxModule_basic"
```
The only difference between version 7 and newer versions is support for
different data types. We should allow this pattern to match as early as
7. Earlier versions have a more manual broadcast specification through
attributes, so I did not include those versions.
See: [onnx.Div
docs](https://onnx.ai/onnx/operators/onnx__Div.html#l-onnx-doc-divl)
Reduce mean lowerings did not succesfully lower to `linalg` via torched.
There were two separate paths that could be consolidated to a single
simpler pass. This resulted in a significant improvement in test
coverage.
If the broadcast shape is length-1 at a dim while `?` in the input dim
then we need to broadcast to the dynamic dim. This is equivalent to
taking a max of two dimensions.
This folds small version of the tensor-scalar comparison operators as
they are commonly used for shape computations. This includes le, lt, ge,
gt, eq, and ne.
The current padding operation was not functional for dynamic shapes.
Updated and enabled tests so that onnx.pad tests pass.
Work TBD for reflection padding.
We can support `onnx.Size` by requesing the size of each dimensions and
taking the product of the results, then packing it into a tensor.
---------
Co-authored-by: Scott Todd <scott.todd0@gmail.com>
This mostly copy-pastes the reduce minimum implementation to reduce max
to improve test coverage. We also improve the aten lowering for min/max
dim for unsigned types.
The addition of an e2e test is actually provided in the Shark-Testsuite.
This adds 2 test cases for the gridsampler e2e test.
Also as intended there were some items found which needed correction, so
the Gridsampler op has also a change.
Current implementation depends on using `aten.view` which has issues
inferring tensor collapse/expand operations during the lowering to
`linalg`. Using flatten and unsqueeze better infers what the later
reshape behavior.
Add e2d support for `aten.linalg_norm` by decompose it to
`aten.linalg_vector_norm`.
Lowering to `aten.linalg_matrix_norm` is still unsupported.
To Test:
`python -m e2e_testing.main -v`
---------
Co-authored-by: Ze Zhang <ze.zhang@getcruise.com>
`getRawBuffer` expects a densely packed vector of `i1` values however
`onnx` does not densely pack the values. Include code to handle the
packing / unpacking.
A handful of operations are commonly used in shape calculations (slice,
concat, broadcast). Added these additional folders to better propagate
simple shape computations.
Existing lowering via aten.view does not work as well for dynamic shapes
as the lowering to tensor.expand must re-infer dynamic shape matching.
Better to directly lower.
This is the lowering of gridsampler from onnx to torch using our prior
implementation of AtenGridSamplerOp.
Here are several checks for cornercases implemented. We may decide to
have part of these checks in AtenGridSamplerOp instead of the onnx
lowering portion.
Finish supporting importing the vast majority of `onnx` operations. This
includes:
- region support
- region value inherentance
- `torch.string` support
- `torch.list` support
- `torch.optional` support
A bunch of small fixes are interlinked and trigger crashes if not
addressed as a group. This includes:
- aten view when expand from a rank-0 tensor
- slice folder with negative indices
- `aten._shape_as_tensor` folder on a rank-0 tensor
- `aten.cat` of a tensor with a length-0 tensor
The decomposition only suports a NCHW lowering however the operation can
support arbitrary spatial dimensions. Updated the lowering to better
support spatial dimensions.
The corrective transpose at the end is computed incorrectly. Is it
actually computin the inverse transpose. Inverting the permutations
fixes the issue.
Torch lowering only supported the most recent version. Refactored the
lowering so more easily handle default values and optional operands /
attributes.
Added Support for float dtype in in torch.arange in TOSA Dialect
This resolves the following issue :-
https://github.com/llvm/torch-mlir/issues/2762
The following test cases are passing after this change
1. ArangeDtypeIntModule_basic
2. ArangeFloatModule_basic
3. ArangeNegativeStartFloatModule_basic
4. ArangeStartFloatModule_basic
5. ArangeStartNegativeStepFloatModule_basic
6. ArangeStartOutDtypeModule_basic
7. ArangeStartStepFloatModule_basic
---------
Co-authored-by: James Newling <james.newling@gmail.com>
We collapsed and broadcasted scatter indices to a single element
version. We should instead upport `tm_tensor.scatter`s support for
multiple indices and the implicitly broadcasted behavior. This avoids
the serialization and materializing a needlessly large indices tensor.
There is no reason to treat `ConstantOfShape` as a specialized import
any as there exists a onnx-to-torch equivalent. Dropping the import
coding and adding support for resource conversion substantially
increases test coverage for dynamically shaped tests.
Strided slicing can occur with a negative stride. In these cases we need
to bound end differently. This included removing a function that was
generating bad limits.
According to the [official TOSA
spec](https://www.mlplatform.org/tosa/tosa_spec.html#_cast), `tosa.cast`
allows a cast from `fp32` to `fp16`. We were not previously accounting
for this in the `TorchToTosa` lowering.
Also did a tiny bit of cleanup in the code to make it easier to spot
which conversions are currently allowed.
---------
Co-authored-by: Srinath Avadhanula <srinath.avadhanula@getcruise.com>
This enables better re-use in downstreams which use different func
implementations and should have no impact on those that don't except in
opt pipelines if using the old form. With interfaces, explicit pipelines
via `--pass-pipeline=` must be used.
Simple folder for limited size aten tensor operations. This is primarily
useful for shape computation folding as they unfortunately can use
`aten` operators. Add, sub, mul are common examples of these folders.
Onnx slice lowering used arange needlessly instead of directly
constructing the constant dimension values. This makes lowerings to
linalg struggle as multiple folders are required to get what is a
constant index value.
We can route the torch tests via `onnx` using the `torch.onnx.export`
tooling. We can then reimport, lower to torch, and compile to linalg to
validate the onnx path is working correctly.
The current implementation exposes some failures in the `onnx` path so
we cannot enable the onnx test suite yet due to segmentation faults.
This commit adds the OnnxToTorch lowering for cosh, acosh, asin, asinh,
and atanh op.
This commit also adds the TorchToLinalg lowering for acosh, asin, asinh,
and atanh op.
Signed-Off By: Vivek Khandelwal <vivekkhandelwal1424@gmail.com>
Some operations include a backend matcher for specialized operations. We
map these back to generics so they appropriately match to the high
performance versions. This is done for the attention operation.
Fixes https://github.com/llvm/torch-mlir/issues/2866
Some backends / downstream projects expect that a "fully converted"
program has no remaining ops or attributes from the original dialect(s).
This commit adds the OnnxToTorch support for Mean, IsInf, IsNaN, and
PRelu ops. All high priority ops were taken so went with these. The non
trivial ones are Mean and IsInf which might require extra review
---------
Co-authored-by: MaheshRavishankar <mravisha@amd.com>
By updating convertScalarToDtype invocation pass original source and
destination datatypes for the add op. Also fixes a potential problem
with the sub op.
---------
Co-authored-by: Xida Ren <xida.ren.dev@gmail.com>
The lowering decomposes AtenTraceOp into an AtenDiagonalOp followed by
AtenSumOp.
The progress is tracked in
https://github.com/nod-ai/SHARK-Turbine/issues/333.
---------
Co-authored-by: Franz Haniel <franz.haniel@amd.com>
There is no lowering support for math::AbsIOp, so if the operand is an
integer type, it will fail to lower to math::AbsFOp since the op operand
#0 must be floating-point-like.
This PR contains three commits to update the validation checks in the
ONNX -> Torch conversion pass for the AveragePool, Pad, and Slice operators:
> onnx: fix preconditions for lowering AveragePool ops
>
> The `pads` attribute of the AveragePool operator specifies the value to
> pad at both the beginning as well as the end of the axis (see
> https://onnx.ai/onnx/operators/onnx__AveragePool.html#attributes), so
> the size of this attribute should be twice the rank of the input tensor.
> However, our TorchOnnxToTorch bails out early since it incorrectly
> compares the pads attribute with the rank (not twice the rank) of the
> input tensor.
>
> This patch fixes the code to match the spec and adds a lit test.
> onnx: allow optional constant value for Pad operator
>
> The `constant_value` input of the onnx.Pad operator is optional (see
> https://onnx.ai/onnx/operators/onnx__Pad.html#inputs), but the
existing
> logic for lowering the operator into the Torch dialect assumes that it
> is mandatory.
>
> This patch makes the attribute optional and constructs a default value
> (a list of zeros the size of the input tensor) if the attribute was not
> specified.
> onnx: fix checks for axes and steps inputs of Slice operator
>
> The ONNX Spec for the Slice operator allows the `starts` and `ends`
> inputs to have fewer indices that the dimensions of the `data` tensor
> (see https://onnx.ai/onnx/operators/onnx__Slice.html), but our code
> expects these inputs to be as many as the `data` tensor's dimensions.
>
> More precisely, the spec requires that the `starts` and `ends` inputs
> are only as long as the `axes` input, but since the `axes` input is
> optional, the default type for the `axes` input has to match the type
> for the `starts` and `ends` inputs. Moreover, the number of indices in
> the `steps` input also has to match those in the `axes` inputs (instad
> of matching the dimensions of the `data` input).
>
> This patch fixes the checks in the TorchOnnxToTorch conversion so that
> they match the ONNX spec.
This commit modifies the OnnxToTorch lowering of Onnx.Reshape op by
creating the result shape list for the aten.reshape using the result
shape values inferred from the op's result shape.
Signed-Off By: Vivek Khandelwal <vivekkhandelwal1424@gmail.com>
Folds aten::index_select ops under the following conditions:
1. If the input and output are the same shape, the indexing operation is
a NOP, so just return the input.
2. If the input has shape <1x1x...xNx...x1> (all 1's except for one
dim), and the output shape is <1x1x...x1> (all 1's), then there is a
single index, so extract the single element value and return a tensor
with that value.
---------
Co-authored-by: Dave Liddell <dliddell@xilinx.com>
Lowering of torch.aten.all.dim to linalg.
Per PyTorch documentation:
> This function matches the behaviour of NumPy in returning output of
dtype bool for all supported dtypes except uint8. For uint8 the dtype of
output is uint8 itself.
Since there is no support for ui8 in torch-mlir currently
(https://github.com/llvm/torch-mlir/pull/1384#issuecomment-1260011334)
implementation returns failure for that case.
If a tensor is initialized by a list with a single constant integer,
this folder turns it into a torch.vtensor.literal
---------
Co-authored-by: Dave Liddell <dliddell@xilinx.com>
Leaning on the QDQ functionality in torch we can support the QLinearConv
operation by piggybacking through `torch.Convolution`. This includes
some changes such as allowing the `onnx` rewriter to run recursively.
Doing so allows `QLinearConv` to decopmose to `onnx.Convolution` which
is then lowered to `torch`.
The existing `flatten` lowering did not define what the intermediate
shape was. This could result in failures to lower further to linalg as
the intermediate shape was unknown. Added a shape refinement section.
So that the CumSum Op in OPT can get the constant that it requires to be lowered to TMTensor
---------
Co-authored-by: Rob Suderman <rob.suderman@gmail.com>
Co-authored-by: Xida Ren <xida.ren.dev@gmail.com>
`[build]
D:\Dev\iree\third_party\torch-mlir\lib\Conversion\TorchOnnxToTorch\DefaultDomainGtoP.cpp(734):
warning C4305: 'argument': truncation from 'double' to 'float'`
`torch` requires that padding be symmetric for pooling operations. To
support non-symmetric pad we need to separately materialize out the
padding operation.
---------
Co-authored-by: James Newling <james.newling@gmail.com>
We do not support average pool when `countIncludePad is set to false.
However if the input is unpadded then the setting of the boolean is
unneeded. Extended use by checking if padding is zero before rejecting
the lowering.
With the recent LLVM integrate and changes from
https://github.com/llvm/llvm-project/pull/78260, we hit this build error
in Stablehlo (which is quite old).
```
external/stablehlo/stablehlo/transforms/StablehloRefineShapes.cpp:1020:14: error: no member named 'startRootUpdate' in 'mlir::PatternRewriter'
rewriter.startRootUpdate(op);
~~~~~~~~ ^
external/stablehlo/stablehlo/transforms/StablehloRefineShapes.cpp:1026:16: error: no member named 'finalizeRootUpdate' in 'mlir::PatternRewriter'
rewriter.finalizeRootUpdate(op);
~~~~~~~~ ^
external/stablehlo/stablehlo/transforms/StablehloRefineShapes.cpp:1029:16: error: no member named 'cancelRootUpdate' in 'mlir::PatternRewriter'
rewriter.cancelRootUpdate(op);
~~~~~~~~ ^
external/stablehlo/stablehlo/transforms/StablehloRefineShapes.cpp:1108:14: error: no member named 'updateRootInPlace' in 'mlir::PatternRewriter'
rewriter.updateRootInPlace(op->getParentOp(), [&]() { return; });
~~~~~~~~ ^
4 errors generated.
Target @torch-mlir//:torch-mlir-opt failed to build
```
I'm still puzzled as to how this didn't fail with the CMake merge gating
CI (do we not test Stablehlo builds/tests?). In any case, bumping our
submodule to https://github.com/openxla/stablehlo/pull/1918 fixes it.
It exposes a new failing lit test in TorchToStablehlo though, that I
have looped stablehlo developers into
([here](https://discord.com/channels/999073994483433573/999074539138990131/1201235845391331419)).
```
bazel run @torch-mlir//test/Conversion:TorchToStablehlo/scatter.mlir.test
...external/torch-mlir/test/Conversion/TorchToStablehlo/scatter.mlir
within split at <stdin>:1 offset :33:8: error: unexpected error: Expects non-empty reduction block for type inference
%0 = torch.aten.scatter.src %arg0, %int0, %arg1, %arg2 : !torch.vtensor<[?,?],si64>, !torch.int, !torch.vtensor<[?,?],si64>, !torch.vtensor<[?,?],si64> -> !torch.vtensor<[?,?],si64>
^
LLVM ERROR: Failed to infer result type(s).
```
Bazel CI:
https://github.com/sjain-stanford/torch-mlir/actions/runs/7732673480/job/21083102228
`onnx` explicitly specifies that `raw_data` is stored in `little-endian`
layout. While converting
to `torch` we need to convert from a known endian format to an internal
format of consistent
layout. This means endianness must be correct during the import of
`onnx.Constant`.
---------
Co-authored-by: Xida Ren (Cedar) <cedar.ren@gmail.com>
Required some massaging of LTC to make it warning clean, and I had to
manually disable some warnings on the generated source files (which we
don't control).
The project is warning clean now.
The `-Werror` flag is disabled by default as we can't control everywhere
people will try to build/install. The CI enables it via
-DTORCH_MLIR_ENABLE_WERROR_FLAG=ON.
Linalg has quantized specific operations. We can lower to these
operations when there is a known zeropoint and scale operations. This
allows the `convolution` to occur with lower bitwidth's, improving the
overall performance.
We were seeing some assertion failures after some checks around folders
were tightened up in LLVM:
https://github.com/llvm/llvm-project/pull/75887 . This PR essentially
moves the logic that used to be applied at the LLVM level into the
folder, which seems to be the suggested fix.
I'm not sure if the IR that caused issues for us _should_ be valid?
```
%1 = torch.aten.detach %arg0 : !torch.tensor<[1],f32> -> !torch.tensor
```
A better fix might be to create a verifier ensuring the result of
`aten.detach` has the same type as its operand.
---------
Co-authored-by: aaron-stgeorge <aaron.stgeorge@getcruise.com>
After noticing a number of commits with unrelated formatting changes,
I think something was changed with clang-format at one point and we're
seeing a number of unrelated changes. Doing a refresh can help avoid
this.
The changes made here came from
```
find lib -iname *.h -o -iname *.cpp | xargs clang-format -i --style=llvm
find include -iname *.h -o -iname *.cpp | xargs clang-format -i --style=llvm
find projects -iname *.h -o -iname *.cpp | xargs clang-format -i --style=llvm
```
Torch does not have an equivalent matmul operation for integers. Instead
it sidechannels the information via its quantized types. For this
lowering we setup these sidechannels then invoke `torch.mm`.
This preserves sparsity at the most obvious places of lowering TORCH
tensors to MLIR RankedTensorType tensors. Other places are marked for
audit. With some initial lowering tests.
This adds an encoding field to the torch type, using the interfaces for
printing, parsing, and verification. Note that although this change
prepares adding sparsity to the torch type (as illustrated by the round
trip and invalid tests), nothing in this change depends on the actual
contents of the encoding field!
This includes custom op matching for decomposed operations and fusing
dequantization into dense operations. As a validation we compare
to the dequant+mm torch implementation.
We can plumb the linear matmul into pytorch using its quantized types
with side channel information. To handle the final int8 operation we
dequantize and requantize.
This commit adds mapping from `onnx.pad` op to `torch.pad` op. Currently
it does not support `axes` parameter of `onnx.pad` op.
Signed-off-by: Gaurav Shukla <gaurav.shukla@amd.com>
The logic here is very similar to the conversion for AdaptiveAvgPool1d
#2661 with a few modifications:
1. buffVal = -inf instead of 0
2. the main linalg generic op accumulates a max, instead of a sum, to
the first output tensor
3. avg pooling requires dividing the sum pool by the kernel width, which
we stored as an auxilliary tensor (kSizeTensor). Here, the auxiliary
tensor will be recording the indices. Strangely enough, the only
signature available for this function is to return indices, and it
appears that they must be computed whether the user desires them or not.
See
[pytorch/torch/nn/functional.py](https://github.com/pytorch/pytorch/blob/main/torch/nn/functional.py#L1174).
Before writing other adaptive pooling conversions, the logic of this
decomposition should be rolled into a helper function that will work for
both max and avg pooling ops. Even the auxiliary tensor should likely be
automated. This code was written in a slightly more tedious way than
strictly necessary (often using loops to fill SmallVectors up to rank-2,
which is only two in this case), in order to more easily facilitate the
transition to a helper function.
convolution with [time,batch,channel] ordering, as opposed to the
default [batch, channel, time]. Currently implementing by transposing
the input and output, but may need to get its own implementation in the
future because this is supposed to be an op that gives a speedup. This
is used by fairseq
(https://github.com/facebookresearch/fairseq/issues/172).
(in case you were wondering like me, this is different from transposed
convolution. Transposed convolution has fractional strides).
---------
Co-authored-by: Xida Ren <xida.ren.dev@gmail.com>
Co-authored-by: Frederik Harwath <frederik.harwath@amd.com>
Currently transposed convolution is not handled correctly by
`TorchToTosa`. This PR allows transposed convolutions to pass through
the conversion so that they can be handled by other conversion passes
later in a pipeline.
An example input which produces a compilation error is:
```
func.func @forward(%input: !torch.vtensor<[1,64,1,100],f32>) -> !torch.vtensor<[1,64,2,200],f32> {
%true = torch.constant.bool true
%int1 = torch.constant.int 1
%int2 = torch.constant.int 2
%weight = torch.vtensor.literal(dense<0.0> : tensor<64x64x3x3xf32>) : !torch.vtensor<[64,64,3,3],f32>
%bias = torch.vtensor.literal(dense<0.0> : tensor<64xf32>) : !torch.vtensor<[64],f32>
%stride = torch.prim.ListConstruct %int2, %int2 : (!torch.int, !torch.int) -> !torch.list<int>
%int1x1 = torch.prim.ListConstruct %int1, %int1 : (!torch.int, !torch.int) -> !torch.list<int>
%output = torch.aten.convolution %input, %weight, %bias, %stride, %int1x1, %int1x1, %true, %int1x1, %int1 : !torch.vtensor<[1,64,1,100],f32>, !torch.vtensor<[64,64,3,3],f32>, !torch.vtensor<[64],f32>, !torch.list<int>, !torch.list<int>, !torch.list<int>, !torch.bool, !torch.list<int>, !torch.int -> !torch.vtensor<[1,64,2,200],f32>
return %output : !torch.vtensor<[1,64,2,200],f32>
}
```
This MLIR produces an error about a cast operation with a size mismatch
when passed through `torch-to-tosa`:
```
error: 'tensor.cast' op operand type 'tensor<1x64x1x50xf32>' and result type 'tensor<1x64x2x200xf32>' are cast incompatible
```
---------
Co-authored-by: Srinath Avadhanula <srinath.avadhanula@getcruise.com>
Introduced in 704cfdaf08 of @wu-s-john
g++ compiler error:
Pooling.cpp:177:13: error: explicit specialization in non-namespace
scope ‘class
Design looks good, g++ is just freaking out for no good reason.
Un-nesting the template classes fixes the error.
We don't have g++ CI. This hopefully happens infrequently enough that we
can just fix manually. My service to those folks who really like
building with g++... :)
We can make the per-tensor version of the operation to the dequantize
operation via marking with the make quantized tensor component. This
introductions the `qint*` and `quint*` tensor type that can be lowered
to teh appropriate dequantization behavior during the torch-to-linalg
conversion.
We can map the per_tensor case to the `torch.aten.quantize_per_linear`
operation. In this case we extract the `scale` and `zeropoint` values
and directly invoke the quantization, then return the integer
representation value.
Implemented ONNX.Range. The spec says the data type for start, limit,
delta are 0-D can be double, float, int16, int32, int64, All int types
mapped to !torch.int and all float types mapped to !torch.float
---------
Co-authored-by: Kumar Deepak <kumar@xilinx.com>
Handles the multiple cases of `onnx` constant values and converts them
to `torch` literal tensors. This can include splats with a single
integer or floating point value, a set of explicit integer values, or
an elements array attr of values.
Handle both `torch.dequantize` and `torch.quantize_per_tensor` including
the op based quantization parameter tracking. This includes adding
`qint32` to torch types as it was missing during the initial type
inclusion.
For testing we only have `torch.int8` and `torch.float` types on
function boundaries as the `qint8` types require passing the scale
and zero point quantization information which is not supported yet.
This PR updates the torch-to-tosa conversion with following changes:
- Support torch.none as min/max input argument for tosa.clamp op
- Support negative value as start index for tosa.slice op
- Add tosa.logical_or lowering support
e2e test:
python -m e2e_testing.main --config=tosa
LIT tests:
cmake --build build --target tools/torch-mlir/all
---------
Co-authored-by: Ze Zhang <ze.zhang@getcruise.com>
Adaptive pooling ops can only be decomposed into their non-adaptive
counterparts in trivial cases.
For example, the current decomposition for AtenAdaptiveAvgPool1dOp in
DecomposeComplexOps.cpp supports outSize = inSize (i.e., do literally
nothing), and outSize = 1 (i.e., do a batched average).
The reason adaptive pooling ops are difficult to lower to linalg is that
they are not constantly strided. They are computed by taking an input
tensor of shape (N, C, Hin), and an output size Hout, and computing the
output tensor at position (n,c, h) in the following way:
1. compute st(h) = (h*Hin)//Hout
2. compute en(h) = 1 + ((h+1)*Hin -1)//Hout
3. apply a computation (max or avg) to the slice: INPUT[n, c,
st(h):en(h)]
The provided sample implementation (for ConvertAtenAdaptiveAvgPool1dOp)
uses tensor.extract to access the input tensor inside the payload of a
linalg generic op. This is likely an unattractive use of linalg generic
ops, which is why I am asking for some more targeted feedback on the
validity of this approach before attempting to support the many other
adaptive pooling ops.
Specifically:
- Is the performance of this implementation bad enough to warrant
targeting different dialects entirely? e.g. TMtensor/linalg ext/ etc.
- If the provided implementation is of acceptable performance to the
community, then is it permissable to remove the Adaptive pooling
decompositions from DecomposeComplexOps.cpp? Based on the current
structure of the -torch-decompose-complex-ops pass, it does not seem
possible to only decompose the adaptive ops in special cases (it seems
to get stuck in an infinite loop on a match failure). I would be happy
to instead incorporate the case logic into the conversion directly, and
remove the decompositions once they are rendered completely obsolete.
As long as this approach is acceptable, I can clean up the
implementation with some helper functions, and quickly add support for
each of the remaining Adaptive pooling ops.
Adds a lowering to Linalg for reflection_pad1d. Based on ideas/code from draft PR
https://github.com/llvm/torch-mlir/pull/2693.
---------
Co-authored-by: Kumar Deepak <kumar@xilinx.com>
The expression for HardSigmoid in Onnx
(https://onnx.ai/onnx/operators/onnx__HardSigmoid.html): max(0, min(1,
alpha * x + beta))
is inherently different from HardSigmoid in Torch
(https://pytorch.org/docs/stable/generated/torch.nn.Hardsigmoid.html)
which is: if x < -3 -> 0
elif x > 3 -> 1
else x/6 + 1/2
That being said, it was just better to compute out the entire expression
when translating the Onnx expression to Torch mlir, which is done in
this PR. Some of the logic is shared from the files in
`DecomposeComplexOps`. Therefore, refactored some shared logic between
`DecomposeComplexOps` and `DefaultDomainGToP` and put it in a `Utils`
file.
lialan
Wu Yuan
Yuanqiang Liu
zjgarvey
Andrew Woloszyn
Xinyu Yang
penguin_wwy
Peiming Liu
Aaron St George
NeverRaR
Archana Ramalingam
Stella Laurenzo
Andreas Falkenberg
jinchen
Angel Zhang
Aart Bik
aldesilv
Benoit Jacob
Jiawei Wu
Vinayak Dev
Vivek Khandelwal
Xida Ren (Cedar)
Rob Suderman
Ze Zhang
Prashant Kumar
Avinash Sharma
Phaneesh Barwaria
IanWood1
Xinan Jiang(姜曦楠)
Thomas Dietert
ptrifunovic98
Gaurav Shukla
Xida Ren (Cedar)
schnkmwt
Abhishek-TyRnT
Pavani Chowdary
Nithin Meganathan
Scott Todd
Chi_Liu
mmakevic
Srinath Avadhanula
saienduri
Franz Haniel
Avinash Sharma
Ashay Rane
Dave Liddell
Ben Vanik
Sambhav Jain
Ilija Kalinić
Quinn Dawkins
MaheshRavishankar
Aart Bik
lonely eagle
James Newling
Ramiro Leal-Cavazos
John Wu
Sungsoon Cho
kumardeepakamd
lisaliu1
Han-Chung Wang
Frederik Harwath
Kunwar Grover